WattSoft3 USER'S GUIDE - Metermanager.co.uk
WattSoft3 USER'S GUIDE - Metermanager.co.uk
WattSoft3 USER'S GUIDE - Metermanager.co.uk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TOTAL DATA<br />
This box displays the Main Instrument data (the<br />
data of the real instrument whose address is 1 or<br />
the data of the virtual instrument (see<br />
INSTRUMENT NETWORK paragraph).<br />
The basic variables or the additional ones are<br />
displayed ac<strong>co</strong>rding to the position of the basic<br />
meas./add. measurements selector. The Users<br />
field displays the label given to the instrument on<br />
the alarm set-up box.<br />
The presence of an alarm is indicated by means<br />
of a flashing red LED, placed close to the<br />
relevant variable box. Once an alarm, set as<br />
latch alarm, is called off the LED remains red<br />
and can be reset only by the Reset Latch key<br />
(password protected). When a non-latch type<br />
alarm is called out, the relevant LED be<strong>co</strong>mes<br />
green again.<br />
<strong>WattSoft3</strong> v.3.xx - User guide 32
Change language