WattSoft3 USER'S GUIDE - Metermanager.co.uk

More documents

Recommendations

Info

is associated (same function of the “Cursor plot” selector). If XY graph is chosen, it is possible to set the three variables to be graphically displayed by means of the 3 selector placed in the position of the legend, in the right side of the window. WattSoft3 v.3.xx - User guide 41
DMD LIMIT GRAPH This function displays the load profile of each instrument of the network. The trend of the demanded active power of the selected instrument is plotted as a histogram (green or yellow according to the current tariff). A horizontal line (green or yellow according to the current tariff) represents the maximum demanded active power allowed for the relevant tariff. If this value is exceeded, the colour of the relevant bar becomes red. The values of the maximum demanded active power limits and the relevant integration time are to be set in the “Define cost parameters” window of the set-up menu (see “ENERGY COST” paragraph). The limits are to be set in the “Installed power” box (for each tariff) and the integration time in the “kW dmd” box. WattSoft3 uses the Wdmd values directly read from the instrument (except WM2/EM2) to build WattSoft3 v.3.xx - User guide 42
Page 1 and 2: WattSoft3 Energy Management Softwar
Page 3 and 4: location. The rights granted to the
Page 5 and 6: TABLE OF CONTENTS COPYRIGHT........
Page 7 and 8: WattSoft3 INTRODUCTION OPERATING MA
Page 9 and 10: SYSTEM REQUIREMENTS In order to ope
Page 11 and 12: MAIN MENU After the program is laun
Page 13 and 14: SET-UP The Set-up menu allows the u
Page 15 and 16: New password allows the user to cho
Page 17 and 18: Additional Variables enables the us
Page 19 and 20: INSTRUMENT NETWORK The configuratio
Page 21 and 22: Main Instrument: by means of this k
Page 23 and 24: ALARM MANAGEMENT In this box, it is
Page 25 and 26: ADDITIONAL VARIABLES Double-click o
Page 27 and 28: Printing Interval defines the inter
Page 29 and 30: Monthly cost per kW. AxB) Amount Mo
Page 31 and 32: kW dmd enables the user to set the
Page 33 and 34: TOTAL DATA This box displays the Ma
Page 35 and 36: SINGLE DATA The data relevant to al
Page 37 and 38: ALARM This page shows the whole lis
Page 39 and 40: value is the average of the previou
Page 41: autoranging view, the (Y) button mu
Page 45 and 46: - Instrument n selector: selection
Page 47 and 48: MANUAL LOAD ACTIVATION The Manual L
Page 49 and 50: APPENDIX A: WIRING DIAGRAMS The con
Page 51 and 52: A.3 96x96 Energy Management family
Page 53 and 54: A.5 SPT-90/PQT-90 In SPT-90 and PQT
Page 55 and 56: - Month.txt: this file includes the

WattSoft3 USER'S GUIDE - Metermanager.co.uk

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?