WattSoft3 USER'S GUIDE - Metermanager.co.uk

More documents

Recommendations

Info

Meter Reset (password protected) enables the user to reset all the energy and utility (if available) meters values of the main instrument (only in case of real main instrument). Hours Reset (password protected) resets the hour counter. The Single Alarm Data LED informs that an alarm condition is present in one of the other instruments. Single Data allows the access to the data of all the instruments (except for the main one). The button is not available in case of 1-instrument network. Alarm shows the list of the occurred alarms. Print allows the printing of the displayed data on the default printer. Stop (password protected) terminates the acquisition, exiting to the main menu. The keys on the right side of the window allow the displaying of the graph pages relevant to the listed electrical variables. DMD limit graph displays the load profile graphs relevant to every instrument (see DMD LIMIT GRAPH paragraph). XY graph enables the user to choose three variables of different types to be displayed in the graphical mode (see GRAPH paragraph). WattSoft3 v.3.xx - User guide 33
SINGLE DATA The data relevant to all the instruments connected to the network, grouped up to 6 by 6 according to their type (SPT type, WM2/EM2 type or WMx/EM4/PQT type) in different pages, are displayed in the Single Data box. To display the different pages, the blue buttons located on the bottom left corner must be pressed. The number of the current instrument page is displayed in the upper left corner. The basic variables or the additional ones are displayed according to the position of the basic meas./add. measurements selector. The Users field displays the label given to the instrument on the alarm set-up box. WattSoft3 v.3.xx - User guide 34
Page 1 and 2: WattSoft3 Energy Management Softwar
Page 3 and 4: location. The rights granted to the
Page 5 and 6: TABLE OF CONTENTS COPYRIGHT........
Page 7 and 8: WattSoft3 INTRODUCTION OPERATING MA
Page 9 and 10: SYSTEM REQUIREMENTS In order to ope
Page 11 and 12: MAIN MENU After the program is laun
Page 13 and 14: SET-UP The Set-up menu allows the u
Page 15 and 16: New password allows the user to cho
Page 17 and 18: Additional Variables enables the us
Page 19 and 20: INSTRUMENT NETWORK The configuratio
Page 21 and 22: Main Instrument: by means of this k
Page 23 and 24: ALARM MANAGEMENT In this box, it is
Page 25 and 26: ADDITIONAL VARIABLES Double-click o
Page 27 and 28: Printing Interval defines the inter
Page 29 and 30: Monthly cost per kW. AxB) Amount Mo
Page 31 and 32: kW dmd enables the user to set the
Page 33: TOTAL DATA This box displays the Ma
Page 37 and 38: ALARM This page shows the whole lis
Page 39 and 40: value is the average of the previou
Page 41 and 42: autoranging view, the (Y) button mu
Page 43 and 44: DMD LIMIT GRAPH This function displ
Page 45 and 46: - Instrument n selector: selection
Page 47 and 48: MANUAL LOAD ACTIVATION The Manual L
Page 49 and 50: APPENDIX A: WIRING DIAGRAMS The con
Page 51 and 52: A.3 96x96 Energy Management family
Page 53 and 54: A.5 SPT-90/PQT-90 In SPT-90 and PQT
Page 55 and 56: - Month.txt: this file includes the

WattSoft3 USER'S GUIDE - Metermanager.co.uk

Create successful ePaper yourself

Delete template?

Save as template?