XTreme EMS Manual - MGL Avionics
XTreme EMS Manual - MGL Avionics
XTreme EMS Manual - MGL Avionics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>XTreme</strong>-<strong>EMS</strong> Operating <strong>Manual</strong> Page 2<br />
1 Features<br />
Engine Monitoring:<br />
• 1x Engine RPM display<br />
• 1x Rotor RPM display<br />
• 1x Manifold pressure display<br />
• 1x Oil pressure display<br />
• 1x Oil temperature display<br />
• 2x Auxiliary analog channel displays (Pressure/Temperature/Current)<br />
• 12 Channel EGT/CHT display<br />
• 2x Fuel Flow display<br />
• 2x Fuel Level display<br />
• Special Rotax 912/914 engine monitor mode utilizing the standard built in Rotax NTC CHT probes<br />
• Programmable maintenance timer for scheduled routine engine maintenance<br />
• User settable Hobbs meter (password protected)<br />
• Fuel range / endurance calculated from GPS ground speed. *Note (3)<br />
• Supply Voltage display<br />
• OAT (Outside Air Temperature) display using an external OAT probe<br />
• Engine leaning feature<br />
• Stopwatch timer<br />
• Automatic / <strong>Manual</strong> flight timer<br />
• RTC (Real Time Clock)<br />
• Current monitor to measure charge/discharge currents. *Note (1)<br />
• CO Monitor. *Note (2)<br />
• Engine display screens are automatically configured to optimize screen space depending on what<br />
parameters are been displayed<br />
Hardware:<br />
• Powerful 32 bit ARM processor<br />
• 4.3” high resolution 480x272, sunlight readable, wide viewing angle, 600 nits TFT LCD display<br />
• LED backlight (brightness can be adjusted for low light flying conditions)<br />
• Fits standard 3 1/8” aircraft instrument panel hole<br />
• SD Card interface for data recording, user splash screens, checklists, graphic information pages, firmware<br />
upgrades etc<br />
• 1x RS232 communication port (CO Monitor *Note (2))<br />
• 1x <strong>MGL</strong> <strong>Avionics</strong> Airtalk communication port<br />
• 1x <strong>MGL</strong> <strong>Avionics</strong> RDAC communications port<br />
• 1x CAN communication port<br />
• Rotary control plus 5 independent buttons for easy menu navigation and user input<br />
• External alarm switch output for an external indicator lamp etc<br />
• Support for an external GPS receiver<br />
• Built in RTC (Real Time Clock)<br />
• Wide input supply voltage range of 8 to 30V DC<br />
• Built in voltage reversal and over voltage protection for harsh electrical environments<br />
• Light weight design
Change language