XTreme EMS Manual - MGL Avionics
XTreme EMS Manual - MGL Avionics
XTreme EMS Manual - MGL Avionics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>XTreme</strong>-<strong>EMS</strong> Operating <strong>Manual</strong> Page 42<br />
4.3.10 Volts Setup<br />
VOLTS DISPLAY MAX:<br />
Select the maximum value that you want the volts bargraph in the <strong>EMS</strong> display to show. This can give you increased<br />
display resolution.<br />
VOLTS DISPLAY MIN:<br />
Select the minimum value that you want the volts bargraph in the <strong>EMS</strong> display to show. This can give you increased<br />
display resolution.<br />
HIGH ALARM:<br />
This enables or disables the volts high alarm.<br />
HIGH ALARM:<br />
Enter the voltage threshold for when the high alarm must be activated. Any voltage above this value will activate the<br />
alarm.<br />
HIGH CAUTION:<br />
Enter the voltage for the high caution. This is the lower value of the upper yellow band.<br />
LOW CAUTION:<br />
Enter the voltage for the low caution. This is the upper value of the lower yellow band.<br />
LOW ALARM:<br />
This enables or disables the volts low alarm.<br />
LOW ALARM:<br />
Enter the voltage threshold for when the low alarm must be activated. Any voltage below this value will activate the alarm.<br />
VOLTS CALIBRATION FACTOR:<br />
Measure the battery voltage with a multimeter and then adjust this value to match that of the multimeters volts reading.