Using ImageUltra Builder - IBM Redbooks

More documents

Recommendations

Info

1.22.3 Confirm that you have installed the PXE service correctly 1. Log onto the Windows server 2. Go to Start → Programs →Administrative Tools 3. Select DHCP 4. Locate the Scope Options 5. Ensure that the option 003 Router is installed 6. Ensure that the option name 060 ClassID is installed Figure 1-100 DHCP scope options 7. Locate Start →Programs →PowerQuest DeployCenter 5.5 Tools 8. Ensure that the PXE Configuration Utility is installed 9. If none of these are available, install the PXE option provided with the DeployCenter media. 1.22.4 Confirm you have the correct Network drivers installed in boot disk builder The Boot Disk Builder includes many predefined network drivers. In an event that the network driver you need for the client is not available you have to add it to the Boot Disk Builder. The step-by-step description below will describe how you add your own driver to the Boot Disk Builder: 1. Record client’s network cards VIN identifier a. Create a virtual floppy to help detect the VIN identifier b. Import the virtual floppy into the PXE utility c. Boot the client and record the VIN 2. Add the client network driver to the Boot Desk Builder Record client’s network cards VIN identifier Create a virtual floppy to help detect the VIN identifier: 1. Go to Programs →PowerQuest DeployCenter 5.5 →DeployCenter 5.5 → Tools Boot Disk Builder 2. Select Standalone Boot Disk 96 ThinkVantage Technologies: Using ImageUltra Builder
Figure 1-101 Select Standalone Boot Disks 3. Select Next. 4. In the Run ImageCenter from section, select Do not Run ImageCenter. Figure 1-102 Select option do not run ImageCenter 5. Select Next. 6. Select Virtual Boot Disk File. Chapter 1. ImageUltra Builder 97
Page 1:
Front cover ThinkVantage Technologi
Page 4 and 5:
Note: Before using this information
Page 6 and 7:
1.16.1 Installing the IBM Customiza
Page 8 and 9:
Trademarks The following terms are
Page 10 and 11:
He has co-authored three ThinkVanta
Page 12 and 13:
1.1 Image management today An image
Page 14 and 15:
Operating system, application, and
Page 16 and 17:
1.3.2 Image ► Determine if a driv
Page 18 and 19:
► Determine the location of image
Page 20 and 21:
1.5.2 Image types ► IBM Customiza
Page 22 and 23:
Function Figure 1-2 ImageUltra Buil
Page 24 and 25:
partitioning modules in a base map
Page 26 and 27:
1.5.6 Module Window Tabs When creat
Page 28 and 29:
► Create a utility/filter module
Page 30 and 31:
3. Click Next. You will see a windo
Page 32 and 33:
Figure 1-9 New Repository folder 5.
Page 34 and 35:
6. Select all of the modules to be
Page 36 and 37:
Figure 1-16 Overwrite confirmation
Page 38 and 39:
How to generate a SETUP.ISS file 1.
Page 40 and 41:
8. Click Finish to complete the New
Page 42 and 43:
When the building process is finish
Page 44 and 45:
9. Click Finish to complete the New
Page 46 and 47:
14.Go to the Source tab. Figure 1-3
Page 48 and 49:
3. Click the Options tab and check
Page 50 and 51:
Figure 1-35 IUB repository, operati
Page 52 and 53:
7. Click Next. You will see a windo
Page 54 and 55:
13.Select the OS/Languages tab. You
Page 56 and 57: 19.Go to the Options tab. You will
Page 58 and 59: ► DrivePrep - Delete No Partition
Page 60 and 61: 10.Click Next. You will see a windo
Page 62 and 63: 5. Select the languages and operati
Page 64 and 65: Figure 1-57 Hardware Specific OS mo
Page 66 and 67: 3. Leave the MS-DOS diskette in the
Page 68 and 69: 1. Open ImageUltra Builder. 2. Sele
Page 70 and 71: 1.16.4 Setting the module attribute
Page 72 and 73: 8. Click Browse add select the exec
Page 74 and 75: - Under the General tab in the Name
Page 76 and 77: Figure 1-68 Identify File Destinati
Page 78 and 79: 3. Click Next to proceed to the Cre
Page 80 and 81: 9. Click Next. You will see a windo
Page 82 and 83: 12.Next, we will insert a menu item
Page 84 and 85: 20.Repeat Step 18 to insert another
Page 86 and 87: Figure 1-87 Map settings window Gen
Page 88 and 89: Figure 1-89 Before/ After menu opti
Page 90 and 91: - Prompt the user when the image is
Page 92 and 93: It is not always necessary to inclu
Page 94 and 95: 2. Click the Deploy button or click
Page 96 and 97: Figure 1-96 Deploy CD Map Locations
Page 98 and 99: 1.20.4 Deployment methods In this s
Page 100 and 101: Network deployment This method uses
Page 102 and 103: Modules Maps Repository Figure 1-99
Page 104 and 105: Image Explorer Simplify management
Page 108 and 109: 7. Add the file name Detect Network
Page 110 and 111: 38.Locate the C:\TEMP. 39.And selec
Page 112 and 113: Figure 1-109 Boot Disk Builder - Mi
Page 114 and 115: 14.Add the network adapter descript
Page 116 and 117: 5. Select Boot Disk and click Next
Page 118 and 119: 1.22.7 Capturing the donor image On
Page 120 and 121: 1.23 Image deployment In this secti
Page 122 and 123: 6. Fill in your ImageCenter command
Page 124 and 125: 12.Select the option to create a Vi
Page 126 and 127: 4. Fill in all of the required fiel
Page 128 and 129: 3. Click Next. 4. Select the option
Page 130 and 131: c:\program files\PowerQuest\DeployC
Page 132 and 133: 4. Launch the SMAsetup_.EXE program
Page 134 and 135: Figure 1-135 Building a utility for
Page 136 and 137: 5. Create a module that puts the SD
Page 138 and 139: Rem Connect Network Drive net use z
Page 140 and 141: The hardware in this organization c
Page 142 and 143: Business Units Six: ► Sales ► I
Page 144 and 145: Table 1-3 Phase 1 The first step in
Page 146 and 147: Acme Holdings Inc. has decided that
Page 148 and 149: Figure 1-143 OS map module Applicat
Page 150 and 151: Figure 1-146 Repository - UK Englis
Page 152 and 153: Business Units Six: ► Sales ► I
Page 154 and 155: 144 ThinkVantage Technologies: Usin
Page 156 and 157:
SCSI Small Computer Systems Interfa
Page 158 and 159:
How to get IBM Redbooks Help from I
Page 160 and 161:
IBM service partition 126 IBM Think
Page 162:
V VBE See Virtual Boot Environment
show all

Using ImageUltra Builder - IBM Redbooks

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?