Using ImageUltra Builder - IBM Redbooks

8. Click Browse add select the executable for your imaging tool. In this example we selected
the Symantec DeployCenter executable.
9. Enter the command and switches required to install this image.
10.Click Save to save the changes that have been made.
1.16.5 Build the module from the image files
After all modifications to the module have been completed, the module must be built. The
following steps show the procedure for building the OS module.
1. Select the OS module that is ready to be built.
Figure 1-64 Select the operating system module you wish to build
2. Click Build from the toolbar.
3. A window will open pointing to your source directory.
4. Select the image file for this module and click Open (see Figure 1-65).
Figure 1-65 image file selection window
5. Click OK.
62 ThinkVantage Technologies: Using ImageUltra Builder