Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
10.Click OK.<br />
Figure 1-108 PXE client menu - Detect Network Adapter<br />
11.Exit the configuration Utility.<br />
Boot the client to detect the network VIN identifier<br />
1. Power on the client<br />
2. Press F12 at boot time to activate the alternative boot menu<br />
3. Highlight the correct PXE boot agent for the client<br />
4. example: IBA 4.1.04 Slot 0240<br />
5. The client will now boot to the DeployCenter PXE server<br />
6. On the PXE menu select Detect Network Adapter<br />
7. Press Enter<br />
8. When the boot is completed you will see the VIN number at the bottom on the client<br />
screen. Example: PCI\VEN_8086&DEV_1031&REV_42&SUBSYS_02091014<br />
9. Record that number on a piece of paper. This number will be used to add the correct<br />
network driver for your client into boot desk builder<br />
10.Close the PXE Configuration Utility<br />
Add the correct client network driver to the Boot Disk <strong>Builder</strong><br />
1. Create a share called IMAGES on your server.<br />
2. Download and extract the latest Network driver for your client and save on to a folder on<br />
your deployment server.<br />
3. Open BOOT DISK BUILDER.<br />
4. Select Microsoft TCP/IP Boot Disk.<br />
Chapter 1. <strong>ImageUltra</strong> <strong>Builder</strong> 101