Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
12.Select the option to create a Virtual Boot Disk File<br />
13.Save Virtual Boot Disk File as Unicast Deploy IUB Smart Image<br />
14.Click Finish<br />
15.Your virtual boot disk file, Unicast Deploy IUB Smart Image.vfd, will be saved by default<br />
into:<br />
C:\Program Files\PowerQuest\DeployCenter 5.5\BDBUILD<br />
16.Save your configuration for future use if requested.<br />
17.Open the PowerQuest PXE Configuration Utility.<br />
In the PXE Virtual floppies tab and click the Add button and browse to the folder where<br />
your .vfd file is stored.<br />
C:\Program Files\PowerQuest\DeployCenter 5.5\BDBUILD\<br />
18.Click OK.<br />
.<br />
Figure 1-124 Add Unicast Deploy IUB Script Image to PXE Configuration<br />
19.The server is now setup to accept PXE requests to deploy the <strong>ImageUltra</strong> <strong>Builder</strong> Smart<br />
Image.<br />
20.Before you start deploying the client, you will need to create a SCRIPT.TXT file.<br />
For our example we used the following script file:<br />
SELECT DRIVE 1<br />
DELETE ALL<br />
SELECT FREESPACE FIRST<br />
CREATE /FS=UNFORMATTED /SIZE=15000 POSITION=BEGINNING<br />
SELECT FREESPACE FIRST<br />
SELECT IMAGE 1<br />
RESTORE<br />
SELECT PARTITION LAST<br />
SET ACTIVE<br />
REBOOT<br />
21.Now you can use the UniCast IUB Smart Image menu option to deploy the cloned IUB<br />
Smart image.<br />
114 ThinkVantage Technologies: <strong>Using</strong> <strong>ImageUltra</strong> <strong>Builder</strong>