Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1.22.9 Create a <strong>ImageUltra</strong> <strong>Builder</strong> Smart Image using the donor image as a<br />
base<br />
See 1.6, “<strong>ImageUltra</strong> <strong>Builder</strong> process to create a Smart Image” on page 17.<br />
1.22.10 Re-clone an <strong>ImageUltra</strong> <strong>Builder</strong> after the Smart Image has been<br />
deployed into the Service Partition<br />
Preparation<br />
In this example we will deploy the <strong>ImageUltra</strong> <strong>Builder</strong> Smart Image to a client service<br />
partition. The client hard disk content is then cloned to an imaging server. The cloned image<br />
can then be uni- or multi-casted to multiple clients of the same configuration. This cloning<br />
method is very useful for large rollouts of the same system configuration.<br />
Before beginning the cloing process you have to:<br />
► Connect the client to the <strong>ImageUltra</strong> <strong>Builder</strong> Repository<br />
► Use the <strong>ImageUltra</strong> Network deploy diskette to connect to the repository<br />
Deploying the Portable-Sysprep Smart Image<br />
1. Power on the client<br />
2. Make sure that the system boot from the IUB network deployment disk.<br />
3. When the system completes the boot process the <strong>ImageUltra</strong> builder Choose an image to<br />
Deploy menu will be displayed.<br />
4. Use the arrow keys to select the Base Map<br />
5. Press Enter<br />
6. On the Deploying Driver Map select Yes<br />
7. Press Enter<br />
8. Select the your Driver map<br />
9. Press Enter<br />
10.On the <strong>ImageUltra</strong> Deploy menu confirm your selection of Base map and Driver map.<br />
11.Press Enter<br />
12.When you are prompted for Direct Network Install, select NO. By selecting no you will then<br />
deploy all IUB modules into the service partition of the donor system.Press Enter<br />
13.The system will launch an IUB deployment screen and reboot.<br />
14.The system will reconnect to the IUB repository and begin copying the <strong>ImageUltra</strong><br />
modules down to the donor system.<br />
15.When completed you will see a message on the screen telling you that on the next<br />
REBOOT the system will install.<br />
16.Remove the <strong>ImageUltra</strong> <strong>Builder</strong> Boot disk from the donor<br />
17.Select EXIT<br />
18.You have now successfully created the <strong>ImageUltra</strong> <strong>Builder</strong> donor system and it is now<br />
ready to be cloned to the image distribution server. See 1.22.2, “Use PXE and Virtual Boot<br />
Environment to capture donor image” on page 95 for more details on how to capture your<br />
image.<br />
Chapter 1. <strong>ImageUltra</strong> <strong>Builder</strong> 109