Using ImageUltra Builder - IBM Redbooks

– Edit the C:\IBMWORK\PRODKEYP.FM file to include your Windows Product ID key.
You will need to edit all three lines;
– You will also need to enter information into the USER SETTINGS of your Base Map.
Please refer to “Create your base map” on page 66
12.Use the following procedure to modify the BOOT.INI file so by default, the source computer
will boot to DOS instead of Windows:
a. From the Windows desktop, right-click My Computer and then click Properties.
b. Click the Advanced tab.
c. Click the Startup and Recovery button.
d. In the Default Operating System field, use the drop-down menu to select either DOS or
Microsoft Windows, whichever is present.
Do not select Microsoft Windows 2000 Professional/fastdetect, Microsoft
Windows XP Professional/fastdetect, or Microsoft Windows XP Home/fastdetect.
e. Click OK.
13.Run SYSPREP.EXE as follows:
a. Windows 2000: Run C:\SYSPREP\SYSPREP -quiet
b. Windows XP: Run C:\SYSPREP\SYSPREP.EXE -factory -quiet
Important: For Windows XP, it is mandatory to run the -factory -quiet command.
14.Use either Symantec Ghost or Symantec DeployCenter software to create the image files.
If you intend to deploy the image using CDs, make sure you use the tools provided with
Ghost and Symantec DeployCenter to segment the image into files that can fit on CDs.
15.Store the image file in its own folder. In the case of CD deployment, where you have to
segment the image into CD-sized files, store all of the files in a single folder. Make sure the
folder is in a location that is accessible to the ImageUltra Builder console.
16.Store the following files used to create the image (in our example we used Symantec
DeployCenter) in the same folder as the image file.
– PQIMGCTR.EXE, PQIMGCTR.OVL PQDPLCTR.RTC
– Store any batch files or script files you may have created in the same folder as the
image file.
1.16.3 Add the donor image to the ImageUltra Builder Repository
Complete the following instructions to insert the module:
Chapter 1. ImageUltra Builder 57