Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
Using ImageUltra Builder - IBM Redbooks
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5. Select the languages and operating systems that this OS module supports. For our<br />
example, we selected English and Window 98.<br />
6. Click the Source tab. You will see a window similar to Figure 1-53.<br />
Figure 1-53 Source window<br />
7. Click Browse of the Source directory field and then select the legacy image file that will be<br />
deployed using this module.<br />
8. Click Browse of the Silent install command field.<br />
9. Select a batch file that has the execute command and switched required to install the<br />
legacy image.<br />
10.Click Save to save the changes that have been made.<br />
1.15.4 Build the module<br />
Note: Since this is a hardware specific module based on a legacy image, realistically<br />
this module can only support one language and one OS. <strong>ImageUltra</strong> <strong>Builder</strong> does not<br />
test the image that is used for the module. It is the responsibility of the individual<br />
creating the module to insure the source image file is functional and that the language<br />
and operating systems that are selected for the module are supported by the legacy<br />
image that was used.<br />
Tip: The asterisk after the module name in the title bar of the operating system module<br />
edit window indicates that the module has been modified and not saved yet.<br />
After all modifications to the module have been completed, the module must be built. The<br />
following steps show the procedure for building the OS module.<br />
52 ThinkVantage Technologies: <strong>Using</strong> <strong>ImageUltra</strong> <strong>Builder</strong>