Using ImageUltra Builder - IBM Redbooks

When the building process is finished, you will see a window that lists the script files that
have been created. See Figure 1-24.
Figure 1-24 List of files associated with this build
13.Click Finish. The new module has now been created.
1.11 Creating a device driver module from source files
In this section, we will create a module that will install a device driver. There are two ways of
installing a device driver. Either you use a setup.exe file or a information file (INF).
► A setup.exe file can install the base device driver along with any associated
mini-applications.
► An INF file is a text file that specifies the files that need to be present or downloaded for
your driver to run and allows customization of the installation procedure.
The following sections show how to install an audio driver using both of these methods.
1.11.1 Install SoundMAX audio driver from a setup.exe file
1. Open your ImageUltra Builder Repository and select the location where you wish to create
your new device driver module.
2. Select the Device Drivers tab.
3. Right-click the space in the window, select Insert Device Driver. The New Module Wizard
will now appear.
4. Click Next to start creating a module. You will see a window similar to Figure 1-25 on
page 33.
32 ThinkVantage Technologies: Using ImageUltra Builder