Using ImageUltra Builder - IBM Redbooks

More documents

Recommendations

Info

14.Go to the Source tab. Figure 1-30 SoundMAX Audio Driver: Device Driver window 15.In the Source directory field, type c:\drivers\win\audio. 16.In the silent command field, type setup.exe. 17.In the Parameters field, type -s. 18.Close the Properties window. When prompted, select Yes to save the module. You will see the module under the Device Driver tab on the main console. 19.Right-click the module, select Build. 20.When the build process is finished, you will see a window that lists the script files that have been created. Figure 1-31 Review your scripts window 36 ThinkVantage Technologies: Using ImageUltra Builder
21.Click Finish. The module has now been built. 1.11.2 Install SoundMAX audio driver from an INF file 1. Repeat steps 1 to 13 above. 2. Go to the Source tab and type in the location of where the INF file is stored, for example C:\Drivers. Figure 1-32 Audio driver source file information Chapter 1. ImageUltra Builder 37
Page 1: Front cover ThinkVantage Technologi
Page 4 and 5: Note: Before using this information
Page 6 and 7: 1.16.1 Installing the IBM Customiza
Page 8 and 9: Trademarks The following terms are
Page 10 and 11: He has co-authored three ThinkVanta
Page 12 and 13: 1.1 Image management today An image
Page 14 and 15: Operating system, application, and
Page 16 and 17: 1.3.2 Image ► Determine if a driv
Page 18 and 19: ► Determine the location of image
Page 20 and 21: 1.5.2 Image types ► IBM Customiza
Page 22 and 23: Function Figure 1-2 ImageUltra Buil
Page 24 and 25: partitioning modules in a base map
Page 26 and 27: 1.5.6 Module Window Tabs When creat
Page 28 and 29: ► Create a utility/filter module
Page 30 and 31: 3. Click Next. You will see a windo
Page 32 and 33: Figure 1-9 New Repository folder 5.
Page 34 and 35: 6. Select all of the modules to be
Page 36 and 37: Figure 1-16 Overwrite confirmation
Page 38 and 39: How to generate a SETUP.ISS file 1.
Page 40 and 41: 8. Click Finish to complete the New
Page 42 and 43: When the building process is finish
Page 44 and 45: 9. Click Finish to complete the New
Page 48 and 49: 3. Click the Options tab and check
Page 50 and 51: Figure 1-35 IUB repository, operati
Page 54 and 55: 13.Select the OS/Languages tab. You
Page 56 and 57: 19.Go to the Options tab. You will
Page 58 and 59: ► DrivePrep - Delete No Partition
Page 60 and 61: 10.Click Next. You will see a windo
Page 62 and 63: 5. Select the languages and operati
Page 64 and 65: Figure 1-57 Hardware Specific OS mo
Page 66 and 67: 3. Leave the MS-DOS diskette in the
Page 68 and 69: 1. Open ImageUltra Builder. 2. Sele
Page 70 and 71: 1.16.4 Setting the module attribute
Page 72 and 73: 8. Click Browse add select the exec
Page 74 and 75: - Under the General tab in the Name
Page 76 and 77: Figure 1-68 Identify File Destinati
Page 78 and 79: 3. Click Next to proceed to the Cre
Page 82 and 83: 12.Next, we will insert a menu item
Page 84 and 85: 20.Repeat Step 18 to insert another
Page 86 and 87: Figure 1-87 Map settings window Gen
Page 88 and 89: Figure 1-89 Before/ After menu opti
Page 90 and 91: - Prompt the user when the image is
Page 92 and 93: It is not always necessary to inclu
Page 94 and 95: 2. Click the Deploy button or click
Page 96 and 97:
Figure 1-96 Deploy CD Map Locations
Page 98 and 99:
1.20.4 Deployment methods In this s
Page 100 and 101:
Network deployment This method uses
Page 102 and 103:
Modules Maps Repository Figure 1-99
Page 104 and 105:
Image Explorer Simplify management
Page 106 and 107:
1.22.3 Confirm that you have instal
Page 108 and 109:
7. Add the file name Detect Network
Page 110 and 111:
38.Locate the C:\TEMP. 39.And selec
Page 112 and 113:
Figure 1-109 Boot Disk Builder - Mi
Page 114 and 115:
14.Add the network adapter descript
Page 116 and 117:
5. Select Boot Disk and click Next
Page 118 and 119:
1.22.7 Capturing the donor image On
Page 120 and 121:
1.23 Image deployment In this secti
Page 122 and 123:
6. Fill in your ImageCenter command
Page 124 and 125:
12.Select the option to create a Vi
Page 126 and 127:
4. Fill in all of the required fiel
Page 128 and 129:
3. Click Next. 4. Select the option
Page 130 and 131:
c:\program files\PowerQuest\DeployC
Page 132 and 133:
4. Launch the SMAsetup_.EXE program
Page 134 and 135:
Figure 1-135 Building a utility for
Page 136 and 137:
5. Create a module that puts the SD
Page 138 and 139:
Rem Connect Network Drive net use z
Page 140 and 141:
The hardware in this organization c
Page 142 and 143:
Business Units Six: ► Sales ► I
Page 144 and 145:
Table 1-3 Phase 1 The first step in
Page 146 and 147:
Acme Holdings Inc. has decided that
Page 148 and 149:
Figure 1-143 OS map module Applicat
Page 150 and 151:
Figure 1-146 Repository - UK Englis
Page 152 and 153:
Business Units Six: ► Sales ► I
Page 154 and 155:
144 ThinkVantage Technologies: Usin
Page 156 and 157:
SCSI Small Computer Systems Interfa
Page 158 and 159:
How to get IBM Redbooks Help from I
Page 160 and 161:
IBM service partition 126 IBM Think
Page 162:
V VBE See Virtual Boot Environment
show all

Using ImageUltra Builder - IBM Redbooks

Create successful ePaper yourself

Delete template?

Save as template?