Dataton WATCHOUT User's Guide
Dataton WATCHOUT User's Guide
Dataton WATCHOUT User's Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Preferences<br />
Allows you to specify some miscellaneous settings of the presentation.<br />
Enter the common part of the<br />
display’s IP Address here.<br />
Edit the gradient of the edge<br />
blend by dragging this tween<br />
point. Click to add more points.<br />
Set the frame rate used by any<br />
video material in your presentation.<br />
Activate external control port,<br />
eg, for controlling<br />
<strong>WATCHOUT</strong> from TRAX.<br />
Display Address Prefix<br />
Base Frame Rate<br />
The IP addresses assigned to the displays usually only differ in the last few<br />
digits (see illustration on page 34). By entering the common initial part in this<br />
field, you then only have to enter the last few digits into the specifications<br />
dialog box of each individual display (see “Address” on page 134).<br />
▼ IMPORTANT: You must enter the period that separates the last two<br />
groups of digits here. The complete IP address is made by simply concatenating<br />
the contents of the “Display Address Prefix” field with the contents<br />
of the display’s Address field.<br />
Specifies the primary type of video used in your presentation, if any. This<br />
setting lets <strong>WATCHOUT</strong> optimize some of its behavior to match the target<br />
frame rate.<br />
Chapter 10: Menus 121
Change language