Untitled

Using the LCD monitor to adjust the camera settings
■ You can use the menu on the LCD monitor to set up recording functions.
■ The items indicated by are default settings.
Menu
Sharpness
Contrast
Voice Memo
Voice
Recording
Soft
Normal
Vivid -
High
Normal
Low -
Voice Mute Off On p.41
Scene mode
Off
Sub menu
On
- -
Night, Portrait, Children,
Landscape, Close-up, Text,
Sunset, Dawn, Backlight,
Fireworks, Beach&Snow
※ Menus are subject to change without prior notice.
Available mode
Page
p.39
p.39
p.40
p.40
p.41
Sharpness
■ You can adjust the sharpness of the picture you
are about to take. You cannot check the
sharpness effect on the LCD monitor before you
take a picture, because this function is applied
only when the captured image is stored on the
memory.
Menu
Soft
Normal
Vivid
Contrast
Description
RECORDING
Sharpness Soft
Contrast Normal
Voice Memo Vivid
Voice Recording
■ You can set the difference between bright part of the image and dark part of the
image.
◀
Back
OK
Set
[ Program mode ]
The edges of the image are softened. This effect is suitable for
editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in the
recorded image.
- High : The difference between bright par of
the image is high.
- Normal : The difference between bright par of
the image is normal.
- Low : The difference between bright par of
the image is low.
RECORDING
Sharpness
Contrast
High
Voice Memo Normal
Voice Recording Low
◀ Back OK Set
[ Program mode ]
《39》