Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Before contacting a service centre<br />
■ Please check the following<br />
The camera doesn’t switch on<br />
ㆍThere is low battery capacity<br />
→ Insert fresh batteries. (p.12)<br />
ㆍBattery is inserted incorrectly with the polarities reversed.<br />
→ Insert the battery according to the polarity marks (+, -)<br />
The camera power ceases while in use<br />
ㆍThe battery is exhausted<br />
→ Insert fresh batteries<br />
ㆍThe Camera is turned off automatically<br />
→ Turn on the camera power again.<br />
Battery power quickly drains<br />
ㆍThe Camera is being used in low temperatures<br />
→ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only<br />
remove it in order to take images<br />
Camera does not take images when pressing the Shutter button<br />
ㆍThere is insufficient memory capacity<br />
→ Delete unnecessary image files<br />
ㆍThe memory card has not been formatted<br />
→ Format the memory card (p.48)<br />
ㆍThe memory card is exhausted<br />
→ Insert a new memory card<br />
ㆍThe memory card is locked<br />
→ Refer to [Card Locked!] error message<br />
ㆍThe camera’s power is off<br />
→ Turn the camera power on<br />
ㆍThe battery is exhausted<br />
→ Insert fresh batteries (p.12)<br />
ㆍBattery is inserted incorrectly with the polarities reversed.<br />
→ Insert the battery according to the polarity marks (+, -)<br />
The camera suddenly stops working while in use<br />
ㆍThe camera stopped due to a malfunction<br />
→ Remove /re-insert battery and switch the camera on<br />
The images are unclear<br />
ㆍA picture was taken the subject without setting an appropriate macro mode<br />
→ Select an appropriate macro mode to take a clear image.<br />
ㆍTaking a picture beyond the flash range<br />
→ Take a picture within the flash range<br />
ㆍThe lens is smudged or dirty<br />
→ Clean the lens<br />
《76》
Change language