D1 H.264 M Series DVR User Manual

More documents

Recommendations

Info

The following status bar hides automatically and appears again when putting a mouse pointer to the bar. Table 4.3.1. Button functions in PLAY Mode Button Description Return to the previous menu screen, search window, or exit from the Menu Press to rewind the footage at 1x, 2x and 4x speeds. Reverse playback ◀◀ speed is shown as -1x(normal), -2x (2 times normal) and -4x (4 times normal) at the bottom right of the screen. Jump/Step backward. --◀ The playback position moves 60 seconds backward. ▶/ II Press to play or pause recorded video. ▶-- Jump/Step forward. Playback position moves 60 seconds forward. Press to fast forward the footage at 1x, 2x and 4x speeds. Playback ▶▶ speed is indicated as +1x, +2x and +4x for normal, twice and 4 times of the regular speed at the bottom right of the screen. Press to backup the video. 5. PTZ Control To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the item you wish to control the PTZ camera and control them using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control. Please refer to the table 5.1. for the control. Table 5.1. Button Functions in PTZ Control Item INITIALIZE PAN / TILT ZOOM / FOCUS Description Initialize the PTZ settings of the selected camera. Select PAN/TILT using the mouse or the control button (◀ ▲ ▶ ▼) and press SEL button on the remote control. Adjust the tilt(UP/DOWN) / pan(LEFT/RIGHT) position using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control. Select ZOOM/FOCUS using the mouse or the control button (◀ ▲ ▶ ▼) and press SEL button on the remote control. 56
Figure 5.1. PTZ Control Screen OSD AUTOSCAN PRESET TOUR NUMBER Adjust the zoom(Mouse Wheel Down or Up/Down button of the remote control)/focus(Mouse Wheel Up or Left/Right button of the remote control)position. Select the OSD to enter the menu. Control keys are Right, Left, UP, Down, Select, Far (REW KEY), and Near (FF KEY). Press the ESC button to return to the main menu. Press the PTZ button to escape from the OSD menu. Press the right key (▶) on the control button to start auto scan Press the left key (◀) on the control button to stop auto scan. Select the PRESET and press the left key (◀) on the control button. Then, number input window will appear. Set the number (3 digits) using the number key and press the SEL to set the preset number for the current position. Press the right key (▶) on the control button and set the number (3 digits) to go to the preset number. Select the TOUR and press the right key (▶) on the control button. Then, number input window will appear. Set the number (1 digit) using the number key and press SEL to make the group number work. Press the left key (◀) on the control button to stop tour. <strong>User</strong> can set the preset number in the tour group of the OSD menu. Available only on the TOUR and PRESET menu. Press the ESC button to return to the main menu. 57
Page 1 and 2:
INSTRUCTION MANUAL (N:M_Ver. 2.1_11
Page 3 and 4:
These precautions must be followed
Page 5 and 6: Product Components The package cont
Page 7 and 8: Mounting the HARD DISK 1. Before in
Page 9 and 10: Specifications Input Video Output A
Page 11 and 12: Table of Contents 1. Main Features
Page 13 and 14: 9-7-6. Security ...................
Page 15 and 16: Easy software upgrade Instant and
Page 17 and 18: 13 Press to control Pan/Tilt/Zoom o
Page 19 and 20: 3 Number: To select channel (1, 2,
Page 21 and 22: - QUALITY - RECORDING - SENSOR RECO
Page 23 and 24: - DUAL FRAME RATE - DUAL QUALITY 3-
Page 25 and 26: Figure 3.3.1. Recording mode setup
Page 27 and 28: Figure 3.3.2. Schedule recording se
Page 29 and 30: Item Description ALARM OUT Availabl
Page 31 and 32: Figure 3.4.4. PTZ Control Setup Scr
Page 33 and 34: We recommend that you archive any d
Page 35 and 36: SET DATE&TIME Select the display da
Page 37 and 38: PRIMARY SNTP SERVER: Input the addr
Page 39 and 40: USER PASSWORD ADMIN, NETOWRK, USER1
Page 41 and 42: NETWORK PORT Set a proper port numb
Page 43 and 44: Table 3.8.2. LAN Item Description I
Page 45 and 46: Figure 3.8.6. Network setup screen
Page 47 and 48: Item SAVE SETUP TO A USB Table 3.9.
Page 49 and 50: Figure 3.10.1. Quick Setup screen I
Page 51 and 52: Audio button. Click this button to
Page 53 and 54: When it clicks a Timeline menu, use
Page 55: When it clicks an Archive menu, use
Page 59 and 60: 3. Once you select the media, the s
Page 61 and 62: 7. Upgrading Firmware In order to u
Page 63 and 64: 8-3. Live monitoring mode and funct
Page 65 and 66: 3. Set the conditions and click OK
Page 67 and 68: 4. Press the PLAY button. Then the
Page 69 and 70: Setting Event Set the record path a
Page 71 and 72: 9. Network access using the Exclusi
Page 73 and 74: 9-4-1. Main user interface 9-4-2. C
Page 75 and 76: 8-5-2. Main control panel Button LO
Page 77 and 78: To change a time line scale from 24
Page 79 and 80: 9-6-2-2. Archiving Event Log: Event
Page 81 and 82: 9-6-6. About “About” provides n
Page 83 and 84: Resolution: Sets the resolution for
Page 85 and 86: 9-7-3-3. PTZ Setting the PTZ Contro
Page 87 and 88: 9-7-5-1. System Setting the System
Page 89 and 90: Setting the Send E-Mail: This setti
Page 91 and 92: 9-7-7.Network Select Network to set
Page 93 and 94: o Password: Input network password
Page 95 and 96: 2. Click CONNECT button, and then s
Page 97 and 98: 3. Select Disk and set the values.
Page 99 and 100: 2. Select site to connect from the
Page 101 and 102: Notice When it does a backup with N
Page 103 and 104: Server address: Input IP address of
Page 105 and 106: Open your web browser. Enter the ro
Page 107 and 108:
Internet (ADSL) Connection using DD
Page 109 and 110:
C. How to access DVR with iPhone 1.
show all

D1 H.264 M Series DVR User Manual

Create successful ePaper yourself

Delete template?

Save as template?