D1 H.264 M Series DVR User Manual

More documents

Recommendations

Info

Setting a sensor input terminal: Specify a sensor input terminal number and set the type. SUBMIT: Save surely by pressing this button after setting the value. 9-7-3-2. Alarm Out Setting an alarm output terminal: Sets the alarm output conditions. Alarm out No.: Lite series supports just one alarm output. Sensor In: Outputs an alarm signal when the specified external sensor input terminal receives an input. Motion On: Outputs an alarm signal when the specified video input terminal receives a motion detection signal. Video Loss On: Outputs an alarm signal when a video loss occurs in the specified video input terminal. Alarm Duration: Sets the duration of the alarm output signal Error Alarm: Sets whether to output or not an alarm signal when the error condition occurs. (Options are OFF, ALL, HDD ERROR and VIDEO LOSS.) SUBMIT: Save surely by pressing this button after setting the value. 84
9-7-3-3. PTZ Setting the PTZ Control: Sets the communication environment for remotely operating PTZ dome cameras connected to RS485 terminals. Camera channel designation Name: Sets the protocol type for the specified channel. When connecting multiple cameras, set the same protocol for all. Speed: Sets the communication speed. The set value applies to all channels. ID: Sets the camera ID. SUBMIT: Save surely by pressing this button after setting the value. 9-7-3-4. Spot Out Setting the SPOT: Sets the output conditions of the spot video terminal. Spot Type: Sets the output screen layout of the spot terminal. Spot On Event: Sets whether to output or not the video of a sensor recording to spot while it is being 85
Page 1 and 2:
INSTRUCTION MANUAL (N:M_Ver. 2.1_11
Page 3 and 4:
These precautions must be followed
Page 5 and 6:
Product Components The package cont
Page 7 and 8:
Mounting the HARD DISK 1. Before in
Page 9 and 10:
Specifications Input Video Output A
Page 11 and 12:
Table of Contents 1. Main Features
Page 13 and 14:
9-7-6. Security ...................
Page 15 and 16:
Easy software upgrade Instant and
Page 17 and 18:
13 Press to control Pan/Tilt/Zoom o
Page 19 and 20:
3 Number: To select channel (1, 2,
Page 21 and 22:
- QUALITY - RECORDING - SENSOR RECO
Page 23 and 24:
- DUAL FRAME RATE - DUAL QUALITY 3-
Page 25 and 26:
Figure 3.3.1. Recording mode setup
Page 27 and 28:
Figure 3.3.2. Schedule recording se
Page 29 and 30:
Item Description ALARM OUT Availabl
Page 31 and 32:
Figure 3.4.4. PTZ Control Setup Scr
Page 33 and 34: We recommend that you archive any d
Page 35 and 36: SET DATE&TIME Select the display da
Page 37 and 38: PRIMARY SNTP SERVER: Input the addr
Page 39 and 40: USER PASSWORD ADMIN, NETOWRK, USER1
Page 41 and 42: NETWORK PORT Set a proper port numb
Page 43 and 44: Table 3.8.2. LAN Item Description I
Page 45 and 46: Figure 3.8.6. Network setup screen
Page 47 and 48: Item SAVE SETUP TO A USB Table 3.9.
Page 49 and 50: Figure 3.10.1. Quick Setup screen I
Page 51 and 52: Audio button. Click this button to
Page 53 and 54: When it clicks a Timeline menu, use
Page 55 and 56: When it clicks an Archive menu, use
Page 57 and 58: Figure 5.1. PTZ Control Screen OSD
Page 59 and 60: 3. Once you select the media, the s
Page 61 and 62: 7. Upgrading Firmware In order to u
Page 63 and 64: 8-3. Live monitoring mode and funct
Page 65 and 66: 3. Set the conditions and click OK
Page 67 and 68: 4. Press the PLAY button. Then the
Page 69 and 70: Setting Event Set the record path a
Page 71 and 72: 9. Network access using the Exclusi
Page 73 and 74: 9-4-1. Main user interface 9-4-2. C
Page 75 and 76: 8-5-2. Main control panel Button LO
Page 77 and 78: To change a time line scale from 24
Page 79 and 80: 9-6-2-2. Archiving Event Log: Event
Page 81 and 82: 9-6-6. About “About” provides n
Page 83: Resolution: Sets the resolution for
Page 87 and 88: 9-7-5-1. System Setting the System
Page 89 and 90: Setting the Send E-Mail: This setti
Page 91 and 92: 9-7-7.Network Select Network to set
Page 93 and 94: o Password: Input network password
Page 95 and 96: 2. Click CONNECT button, and then s
Page 97 and 98: 3. Select Disk and set the values.
Page 99 and 100: 2. Select site to connect from the
Page 101 and 102: Notice When it does a backup with N
Page 103 and 104: Server address: Input IP address of
Page 105 and 106: Open your web browser. Enter the ro
Page 107 and 108: Internet (ADSL) Connection using DD
Page 109 and 110: C. How to access DVR with iPhone 1.
show all

D1 H.264 M Series DVR User Manual

Create successful ePaper yourself

Delete template?

Save as template?