2010 Kenworth T440/T470 Body Builder Manual

Appendix A
Vehicle Identification
Noise Emission Label
The Noise Emission Label contains the chassis serial number, date of manufacture, and information regarding US noise
emission regulations. This label is not provided on Canadian registered vehicles.
Paint Identification Label
The Paint Identification Label contains the paint colors used by the factory to paint the truck. It lists frame, wheels, cab interior
and exterior colors. This label is located either underneath the dash to the left of the steering column support, inside
the glovebox, or on the passenger’s door frame.
COMPONENT IDENTIFICATION
Each of the following components has their own identification label.
Engine Identification
The engine serial number is stamped on a plate located on the left front of the engine. For further information, please refer
to the Engine Operation and Maintenance Manual (included in the glove compartment of each vehicle).
Engine Identifi cation
Location
(PACCAR PX-8 Shown)
Figure A-3. Engine Identifi cation Location
Transmission Identification
The transmission identification number is stamped on a tag affixed to the right forward side of the transmission case. It
includes among other specifications the transmission model, serial, and part number.
A-3
12/09