2010 Kenworth T440/T470 Body Builder Manual
2010 Kenworth T440/T470 Body Builder Manual
2010 Kenworth T440/T470 Body Builder Manual
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 4<br />
Exhaust & Aftertreatment<br />
GENERAL EXHAUST INFORMATION<br />
<strong>Kenworth</strong> will offer two main DPF and SCR exhaust systems on <strong>T440</strong>/<strong>T470</strong> chassis in <strong>2010</strong>. A Right Hand Under DPF<br />
and SCR system, in which both canisters are located underneath the cab access step, and an Independent DPF and SCR<br />
located vertically back of cab on stanchion brackets.<br />
RH Under DPF and SCR<br />
Independent Back of Cab<br />
The following images depict the typical exhaust routings for each system, and can be used to determine exhaust routing<br />
paths for systems you choose. Dimensional information can be found in Section 5 of this manual.<br />
<strong>Body</strong> <strong>Builder</strong>s must not modify (including altering, substituting, and relocating) the DPF and SCR canisters. The exhaust<br />
piping after it exits the SCR canister may be modifi ed, however using smaller diameter piping or piping with numerous<br />
bends is not recommend as the backpressure requirements of the system may be exceeded.<br />
12/09 4-10