2010 Kenworth T440/T470 Body Builder Manual

Section 5
Frame Layouts
FRAME LAYOUTS
The dimensions in the frame layout section are intended to aid in layout of the chassis, and to help determine the best
possible combination of fuel tanks, battery boxes, the diesel particulate fi lter (DPF), SCR canister, and Diesel Exhaust
Fluid (DEF) tank. For your application, the layouts focus on the under cab area, with appropriate dimensional information
included for pertinent back of cab components. Not all optional equipment is included in this section. Additional components
may be placed on the rail behind components shown. The Back of Cab components are shown primarily for reference.
For more specifi c requirements please work with your local Kenworth Dealer. Please read the instructions carefully.
The following dimensions are consistent across the entire section to aid in the comparison of one layout option versus
another.
TABLE 5-1.
B = Battery box
D = DEF tank
E = Exhaust
F1 = Fuel Tank RHS
F2 = Fuel Tank LHS
T = Tool Box
The layouts are organized by type, specifi cally the arrangement of under cab components. The visual index that follows
will give you a quick overview of the layouts that are included. Using the index locate the layout that you are interested in,
then turn to the specified pages. The charts that follow are then model specific. It is important that the correct chart is used
for accurate dimensional information.
Visual Index
Symbol Description Symbol Description
RHUC DPF/SCR
Vertical DPF/SCR
Parallel Battery Box, Standard Length
In Cab Battery Box
Tool Box
DEF Tank
Clear BOC DEF Tank
Fuel Tank
Cantilever Battery Box
5-1
12/09