Logitech Ltd IU30 Impregnation Unit Operation and Maintenance ...
Logitech Ltd IU30 Impregnation Unit Operation and Maintenance ...
Logitech Ltd IU30 Impregnation Unit Operation and Maintenance ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Safety Precaution Sheet<br />
<strong>Logitech</strong> Vacuum <strong>Impregnation</strong> <strong>Unit</strong>s<br />
NB <strong>Logitech</strong> <strong>Ltd</strong>. assert it’s right under the<br />
Copyright, Designs <strong>and</strong> Patents Act 1988 to be<br />
identified as the author of this work.<br />
© <strong>Logitech</strong> Limited. All rights reserved.<br />
The apparatus/machine is designed for<br />
use with consumables supplied by<br />
<strong>Logitech</strong>. If subjected to misuse,<br />
improper installation, alteration,<br />
neglect, accident or improper repair,<br />
<strong>Logitech</strong> will take no responsibility for<br />
damage(s) to the user or the<br />
equipment.<br />
Dismantling of any part of the<br />
apparatus/machine, in case of service<br />
or repair, should always be performed<br />
by a qualified technician<br />
(electromechanical, electronic,<br />
mechanical, pneumatic, etc.)<br />
To be read carefully before use<br />
1. The operator should be fully aware of the<br />
use of the machine according to the<br />
<strong>Operation</strong> Manual.<br />
2. The machine must be placed in an adequate<br />
working position, providing level, stable<br />
support <strong>and</strong> adequate ventilation. All<br />
functions on the machine <strong>and</strong> any<br />
connected equipment must be in working<br />
order.<br />
3. Be sure that the supply voltage corresponds<br />
to the voltage stated on the back of the<br />
machine. The machine must be earthed.<br />
4. Establish that air outlets are completely<br />
unobstructed.<br />
5. Before loading samples, ensure that the<br />
installation test procedure has been<br />
completed.<br />
6. Ensure that resin volatility is compatible with<br />
the unit.<br />
7. Ensure that all traces of dirt <strong>and</strong> resin are<br />
removed after each process run to prevent<br />
failure of the vacuum system.<br />
8. Observe the current safety regulations for<br />
h<strong>and</strong>ling, emptying <strong>and</strong> disposal of the<br />
waste materials <strong>and</strong> fluids.<br />
9. Before opening the machine or working on<br />
any terminal connections, always turn off the<br />
power <strong>and</strong> remove the plug or cable.<br />
<strong>Logitech</strong> <strong>Ltd</strong>, <strong>IU30</strong> <strong>Impregnation</strong> <strong>Unit</strong> – Manual BE‐03‐02‐2 –version v0211 ‐ Page 3
Change language