Logitech Ltd IU30 Impregnation Unit Operation and Maintenance ...

7.4 Accessories
7.4.1 Introduction
A652–01–880 Issue S
The accessories which can be fitted to the RV pump are shown in Figure 10, and their Item Numbers are listed in
Table 14.
These accessories are briefly described in Sections 7.4.2 to 7.4.14.
7.4.2 Inlet catchpot
The inlet catchpot traps any liquid droplets and prevents their entry into the pump.
7.4.3 Inlet dust filter
The inlet dust filter protects the pump against abrasive dust.
7.4.4 Inlet desiccant trap
Table 14 - Accessory Item Numbers
Accessory Refer to Section Item Number
ITO20K Inlet catchpot 7.4.2 A441–10–000
ITF20K Inlet dust filter 7.4.3 A442–15–000
ITD20K Inlet desiccant trap 7.4.4 A445–10–000
ITC20K Inlet chemical trap 7.4.5 A444–10–000
FL20K Foreline trap 7.4.6 A133–05–000
EMF10 Outlet mist filter 7.4.7 A462–26–000
EMF20 Outlet mist filter 7.4.7 A462–29–000
Gas-ballast adaptor 7.4.8 A505–02–000
Gravity oil drain kit 7.4.9 A505–01–000
Oil drain-extension 7.4.10 A505–03–000
Exhaust nozzle kit 7.4.11 A505–09–000
Vibration isolators (pack of four) 7.4.12 A248–01–404
EBV20 Solenoid Operated Gas-Ballast Valve
7.4.13
220–240 V 50/60 Hz
A500–06–930
100–120 V 50/60 Hz
A500–06–984
PV25EK Pipeline Valve (aluminium)
7.4.14
220–240 V 50/60 Hz
C413–01–000
110–127 V 50/60 Hz
C413–03–000
PV25EK Pipeline Valve (stainless steel)
7.4.14
220–240 V 50/60 Hz
C413–02–000
110–127 V 50/60 Hz
C413–04–000
Use a desiccant trap when you pump limited quantities of water vapour at high pumping speeds to a low vapour
pressure.
© Edwards Limited 2007. All rights reserved. Page 45
Edwards and the Edwards logo are trade marks of Edwards Limited.
Service and spares