Logitech Ltd IU30 Impregnation Unit Operation and Maintenance ...

Material Safety Data Sheet
Date prepared: 26th September 1995
5. Fire-Fighting Measures
6. Accidental Release Measures
7. Handling and Storage
8. Exposure Controls
Material Safety Data Sheet for KEYSTONE OIL BLUE Page 3 of 8
KEYSTONE OIL
BLUE
Date revised: December 2008 0CON-241
Suitable extinguishing media: Small fires: Dry chemical, CO 2 , halon, water spray or
foam.
Large fires: Water spray, fog, or alcohol foam.
Special exposure hazards in fire: In combustion emits toxic fumes
Required special protective
equipment for fire-fighters:
Wear self-contained breathing apparatus to protect
against possibly toxic fumes. Wear full fire-protective
clothing.
Personal precautions: Wear an approved dust respirator (e.g. NIOSH
approved), with all protective clothing and equipment
as directed in Section 8 of this MSDS.
Environmental precautions: Prevent from entering floor drains or sewers. Do not
release to sewer without all proper government
authorities’ permission.
Methods for cleaning: Contain and clean up spill immediately. Sweep
powders carefully, using an absorbent (sweeping
compound) to keep down dust in the area. Scoop
material and absorbent into disposal drum, and seal.
Carefully rinse traces of water soluble dye with light
bleach and water.
Handling for solvent based colours: Ground all containers against static charges.
Avoid creating dust when handling. Wear protective
respirator.
Storage: Protect product from moisture, store in cool, dry
place under low relative humidity, away from
excessive heat. Store in original or equivalent
waterproof containers. Reseal containers tightly after
each use. Keep out of direct sunlight.
Indefinite shelf life when stored carefully as
instructed above.
Engineering measures: Ensure that there is 20% fresh air circulation in the
work area.
Respiratory protection: Wear NIOSH approved dust respirator for your
particular operation and materials being handled.