Industrial seal self study guide - SKF.com
Industrial seal self study guide - SKF.com
Industrial seal self study guide - SKF.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SEAL DESIGN GROUPS (cont.)<br />
CRWA5, CRW5<br />
Wave<strong>seal</strong>s designed without an inner case, CRWA5 has a dual lip<br />
(fig. 3i) and CRW5 has a single lip <strong>seal</strong>ing element. Both are designed<br />
specifically for applications in pressurized <strong>seal</strong> cavities, up to 90 psi<br />
(.62 MPa).<br />
CRWA5<br />
CRWA5, with a dual lip, is designed<br />
for applications in pressurized <strong>seal</strong><br />
cavities (fig. 3i).<br />
HDS1<br />
HDS1 <strong>seal</strong>’s Spring-Lock keeps<br />
the spring in position during <strong>seal</strong><br />
handling, installation, and removal<br />
(fig. 3j).<br />
Large Diameter Metal Clad Seals<br />
Large diameter <strong>seal</strong>s fit shafts 8” (203.20 mm) in diameter and larger.<br />
They <strong>com</strong>e in two basic designs HDS metal clad and HS non-metal<br />
clad (all rubber) <strong>seal</strong>s.<br />
Metal Clad Seals (Type HDS)<br />
Encased in a heavy-duty steel shell, metal clad <strong>seal</strong>s (type HDS)<br />
are specifically designed to withstand the conditions encountered in<br />
heavy-duty applications. These conditions range from slow speed,<br />
abrasive conditions of a scale breaker to the high-speed operation<br />
of finishing stands. They work exceptionally well in rolling mills,<br />
vertical edgers, logging operations and drag line equipment.<br />
HDS type <strong>seal</strong>s are available in three styles HDS1, HDS3 and the<br />
preferred style, HDS2. HDS1 is the basic <strong>seal</strong> design (Fig. 3j). It has<br />
a single <strong>seal</strong>ing element that features Spring-Lock. The Spring-Lock<br />
270˚ wrap feature keeps the spring in position during handling and<br />
<strong>seal</strong> installation as well as during <strong>seal</strong> removal. Spring-Lock is standard<br />
on all three types of metal clad <strong>seal</strong>s.<br />
HDS2 is <strong>SKF</strong>’s preferred large diameter <strong>seal</strong> design. It has a single<br />
<strong>seal</strong>ing element and is available with nitrile, Duralip or <strong>SKF</strong> LongLife<br />
fluoroelastomer lip material. Optional fixed width spacer lugs permit<br />
tandem <strong>seal</strong> installation, and provide a lubrication gap. HDS2 also<br />
features Spring-Lock encased with a Spring-Kover (fig. 3k).<br />
Spring-Kover is a flexible, resin covering that totally encloses the<br />
garter spring. It is used in <strong>seal</strong>ing applications where dirt or other<br />
contaminants may damage the spring, or where the spring could<br />
be dislodged. The Spring-Kover protects the spring without<br />
affecting its operation.<br />
HDS2<br />
HDS2 has a Spring-Lock encased<br />
in a flexible Spring-Kover covering<br />
(fig. 3k).<br />
16