Industrial seal self study guide - SKF.com
Industrial seal self study guide - SKF.com
Industrial seal self study guide - SKF.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
SEAL DESIGN GROUPS (cont.)<br />
VR2<br />
VR2 is the original V-ring (fig. 3dd).<br />
VR3<br />
A narrow axial cross-section makes<br />
VR3 ideal for certain applications<br />
(fig. 3ee).<br />
VR4<br />
VR4 is heavy-duty large diameter<br />
V-Ring (fig. 3ff).<br />
VR5<br />
The heavy-duty, large diameter VR5<br />
is ideal for steel mills, ball mills and<br />
papermills (fig. 3gg).<br />
VR2<br />
This is the original V-Ring (fig. 3dd). It is designed with a wide body<br />
and tapered heel which holds the <strong>seal</strong> firmly against the shaft and acts<br />
as a deflector.<br />
VR2 is available in sizes ranging from .177” to 8.270” (4.50mm<br />
to 210mm). It is generally used in contaminated industrial and<br />
agricultural applications.<br />
VR3<br />
With its very narrow axial cross-section, VR3 is excellent for use in<br />
pillow blocks to supplement or replace labyrinth <strong>seal</strong>s or where the<br />
fitted width (B 1 ) is not adequate for a style VR1 (fig. 3ee). VR3 is<br />
available with nitrite and fluoroelastomer lip materials, in sizes that<br />
fit shafts ranging from 4.13” to 79.724” (110mm to 2000mm).<br />
VR4<br />
Known as the heavy-duty large diameter V-Ring, VR4 is <strong>com</strong>monly<br />
used in rolling mills as a dirt/water excluder (fig. 3ff). Sizes range<br />
from 11.811” to over 78.740” (300mm to over 2000mm) shaft<br />
diameter. VR4 is available in nitrile and flouroelastomer.<br />
VR5<br />
This heavy-duty, large diameter style V-Ring can be easily fitted with<br />
a standard clamping band for axial location in high-speed and large<br />
diameter applications (fig. 3gg). VR5 is ideal for steel mills, ball mills<br />
and paper mills. It is available for shaft diameters from 11.811” to<br />
over 78.740” (300mm to over 2000mm). This design can also be<br />
machined to special widths and lip heights. Available in nitrile and<br />
fluoroelastomer.<br />
VR6<br />
A new version, VR6, is similar except there is no “footer” extension<br />
from the housing (see fig. 3hh). It is available by special quotation. VR4<br />
should be used for most replacement applications. VR6 is a special<br />
order profile mainly used for new machine applications and it will<br />
eventually phase in as a general catalog item.<br />
VR6<br />
VR6 is a new heavy-duty profile<br />
similar to VR5 except it fits a more<br />
<strong>com</strong>pact size (fig. 3hh).<br />
24