VSAN-Troubleshooting-Reference-Manual

Diagnostics and Troubleshooting Reference Manual – Virtual SAN
Using fio-status (Fusion-IO command) to check settings
The final thing to check is the firmware version of the Fusion-IO device. There does
not appear to be an ESXCLI command to display this information. Fortunately
Fusion-IO has provided such a tool and it is installed on the ESXi host along with the
other software components from Fusion-IO. This command provides driver version,
firmware version and product number, which is what is listed on the VCG.
~ # fio-status
Found 1 ioMemory device in this system
Driver version: 3.2.8 build 1350
Adapter: Single Controller Adapter
Fusion-io ioDrive2 1.205TB, Product Number:F00-001-1T20-CS-0001, SN:1210D0925,
FIO SN:1210D0925
External Power: NOT connected
PCIe Power limit threshold: 24.75W
Connected ioMemory modules:
fct0: Product Number:F00-001-1T20-CS-0001, SN:1210D0925
fct0
Attached
ioDrive2 Adapter Controller, Product Number:F00-001-1T20-CS-0001, SN:1210D0925
Located in slot 0 Center of ioDrive2 Adapter Controller SN:1210D0925
PCI:0b:00.0
Firmware v7.1.15, rev 110356 Public
1205.00 GBytes device size
Internal temperature: 55.12 degC, max 58.08 degC
Reserve space status: Healthy; Reserves: 100.00%, warn at 10.00%
Contained VSUs:
fioiom0: ID:0, UUID:a15eb52c-6f40-43b5-8a48-84c7886acfaa
fioiom0 State: Online, Type: block device
ID:0, UUID:a15eb52c-6f40-43b5-8a48-84c7886acfaa
1205.00 GBytes device size
There is now enough information gathered (model, vendor, driver, firmware) that
supportability might be checked on the VMware Compatibility Guide for Virtual SAN.
V M W A R E S T O R A G E B U D O C U M E N T A T I O N / 36