FULLY-AUTOMATIC ESPRESSO COFFEE MACHINE - Wega

PROGRAMMING - chap.6
Technical manual
1
2
3
4
5
6
7
8
9
10
from
11
to
17
control machine alarms
Display of the NN number of alarms due to maximum boiler
filling time being exceeded.
Press ENTER to go to the next check.
Display of the NN number of alarms due to minimum level of
water in the boiler.
Press ENTER to go to the next check.
Display of the NN number of alarms due to the boiler sensor
not working.
Press ENTER to go to the next check.
Display of the NN number of alarms due to blockage of the
group 1 piston.
Press ENTER to go to the next check.
Display of the NN number of alarms due to the lack of coffee
in group 1.
Press ENTER to go to the next check.
Display of the NN number of alarms due to the volumetric
counter of group 1 not working.
Press ENTER to go to the next check.
Display of the NN number of alarms due to insufficient
compression of group 1.
Press ENTER to go to the next check.
Display of the NN number of alarms due to overtemperature
of group 1.
Press ENTER to go to the next check.
Display of the NN number of alarms due to the group 1
compression microswitch.
Press ENTER to go to the next check.
Display of the NN number of alarms due to non-conforming
grinding of group 1.
Press ENTER to go to the next check.
To check group 2 alarms, proceed in the same way as described
above.
zero setting of the alarms
24
english
minimum level
IN the boiler nn
boiler sensor
not active nn
piston motor gr.1
BLOCked nn
not coffee
GROUP 1 nn
volum doser GR.1
does not count nn
insufficient GR 1
compression nn
over temperature
GRoUP 1 nn
MICRO
COMPRESSION GR.1 nn
grinding GR 1
NOt correct nn
c.t. .................. erog. s. GR nnn 2
.......................... NN
While each alarm is displayed it is possible to revert to zero the relative number by keeping the ARROW key
pressed for at least 5 seconds until the message is displayed (example)
water level
in the boiler
TOT. 0000
water level
IN the boiler nn