Micron

V E C T O R O W N E R ’ S M A N U A L
PLACING THE CANOPY IN THE
BAG.
1. Carefully slide the bag over the canopy,
pushing each “ear” into the top corners of the
bag, filling the corners evenly and leaving a
tapered shape.
2. Lock the bag closed with two bights of
suspension line. A shock cord “safety stow”
is used, not rubber bands.
If a Molar strap is
used, make sure that
it is removed before
placing the canopy in
the bag!
3. Stow the remainder of the suspension
lines into the pouch on the underside of the
bag using S-folds that extend from one side
of the pouch to the other. Be sure none of
the lines are trapped between the hook and
loop fastener at the mouth of the pouch.
Another acceptable method of stowing the
lines which some riggers prefer: Stow all the
lines on top of the pouch first, either S-
folding or Figure-8 folding, and insert the
entire line group into the pouch. Remove
the two hook and loop fastener strips from
the bag.
09354 - 11/26/2003
section 3 : stowing suspension lines
Page • 25:88
Rev 0