You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
V E C T O R O W N E R ’ S M A N U A L<br />
PLACING THE BAG IN THE<br />
CONTAINER<br />
1. Place the bagged canopy on the main<br />
container and position the reserve risers in<br />
the reserve pack tray. Fan the links rather<br />
than stacking them on each other, placing<br />
the rear links to the outside. Be sure to place<br />
the reserve risers far enough in the pack tray<br />
so they will lie flat over the shoulders.<br />
2. Pass the other pull-up cord through the<br />
reserve closing loop.<br />
If a T-bar was passed through the bag, thread the ends of the pull-up cord through the hole in the end of the T-bar.<br />
Remove the T-bar from the bagged canopy, pulling the closing loop and pull-up cord through it.<br />
3. Place the bagged canopy in the pack<br />
tray, taking extra care to fill the lower<br />
corners. Then use the pull-up cord to pull<br />
the closing loop up through the bagged<br />
canopy. Secure it with a temporary locking<br />
pin.<br />
Page • 26:88 section 3 : placing the bag in the container<br />
09354 - 11/26/2003<br />
Rev 0