You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
V E C T O R O W N E R ’ S M A N U A L<br />
2. Locate the mark on the steering line that<br />
indicates the correct toggle location.<br />
3. Thread the steering toggle through the<br />
guide ring located on the riser.<br />
note<br />
Verify that this mark<br />
is in the correct<br />
location by referring<br />
to the main canopy<br />
owner’s manual.<br />
4. Thread the end of the steering line through<br />
the Vector 3 steering toggle grommet. Adjust<br />
it so the mark on the steering line is close to the<br />
grommet but has not passed through it.<br />
5. Loop the running end of the steering line<br />
around the toggle and thread it through the<br />
grommet again. Now pull it snug. Check that the<br />
mark remains in the correct place.<br />
Page • 42:88 section 4 : attaching main steering toggles<br />
09354 - 11/26/2003<br />
Rev 0
Change language