Optimod-Surround 8685 V1.0 Operating Manual - Orban

OPTIMOD SURROUND PROCESSOR INSTALLATION 2-63
In all cases, regardless of whether your PC communicates to the 8685
through its serial port or Ethernet connector, it uses the ppp and the
TCP/IP protocols to communicate with the 8685.
Check Hardware Requirements
To connect your PC to your 8685 you will need the following:
• If connecting by Ethernet: a standard Ethernet cable (with RJ45 connectors) to
connect to a network hub or router, or a crossover Ethernet cable to connect directly
to your PC’s Ethernet jack.
• If connecting by serial cable: a null modem cable (also called a “reverse” cable).
This cable has DB9 female connectors at both ends for connecting the 8685 to
the serial port on your computer. If your computer has a DB25 connector, you
must obtain an adapter.
• If connecting by modem: a 3Com/U.S. Robotics® 56kbps fax modem EXT and
normal (not null) modem cable for the 8685 side of the connection. Note that
Orban Customer Service does not support any other type of modem for connecting
to the 8685.
• PC running Windows 2000 (SP3 or higher) XP (SP2 or higher), or Vista (SP1 or
higher).
8685 PC Remote will not run on older Windows versions.
Recommended Hardware Components
Computer................................................................... Pentium III or higher
Available Disk Space ......................................................................... 25 MB
RAM ................................................................................................. 512 MB
Display.......................................................................... 1024x768 or higher
COM Port ...................................................... 16550 (or compatible) UART
WARNING!
When connecting your 8685, use shielded cable to protect the pins in the RS-232
connector from electrostatic discharge.
The following subsections provide steps for connecting to your Optimod 8685 software
using the Windows 2000/XP Direct Cable Connect or via modem connection.
Running the Orban Installer Program
Insert the installer CD into your computer’s CD drive.