F9000N Manual - Fisnar.fr

F9000N & F2004N Series Operating Manual
Section 3 : Teaching Overview Rev. C- Oct. 11
2.4. Jogging
The tip is jogged by pressing the jog buttons after the
Servo button is pressed.
Jog speed has three velocity levels: low, middle and high.
If the right arrow button is pressed, the jog speed
changes to a faster level.
If the left arrow button is pressed, the jog speed changes
to a slower level.
The value of the jog speed (at the velocity level: high) can
be set using the function Jog Speed (Menu 1). (See
Section 6: 4.6 Jog Speed).
The Speed led display on the Teach Pendant shows the
velocity level: high, middle or low.
Servo
A
- 1X
S
- 2Y
T
- 3Z
U
- 4W
V
◄
SPD -
+ 1X
X
+ 2Y
Y
+ 3Z
Z
+ 4W
W
►
SPD +
Changes to Inch Jog Mode. Shift +
/Char
Inch
Menu1
2.5. Data Entry
The Teach Pendant is used also to enter numeric data. If a numeric value is required, the Teach
Pendant will automatically switch to numeric mode. Use the keys 0 – 9, (.), and (-) to enter the
values.
- Page 28 -
© 2010 Fisnar Inc.