AXIS 231D+/232D+ Network Dome Camera User's Manual

More documents

Recommendations

Info

48 AXIS 231D+/232D+ - Connection ModuleConnection ModuleThis section describes the pinout provided by the Connection module consisting of:notused• 4 transistor outputs• 4 digital inputs• power and GND (ground)24V AC Power4 transistor outputs4 digital inputs(see table below)The inputs/outputs are used in applications for event triggering, time lapse recording,alarm notification via email, and picture storage to FTP locations, among others.• Input - for example a doorbell. If the doorbell is pressed, the state changes, andthe input is active (shown under Event Configuration > Port Status).• Output - for example, an alarm device that can be activated from Output buttonsfrom the Live View page or as an action to an Event Type. The output shows asactive (under Event Configuration > Port Status), if the alarm device is activated.Connection Module PinoutFunction Description Function Descriptionn/a not used GND groundn/a not used GND groundn/a not used Transistor Output 4 See belown/a not used Digital Input 4 See belown/a not used Transistor Output 3 See belown/a not used Digital Input 3 See belown/a not used Transistor Output 2 See belowPS GND ground Transistor Output 1 See below24 VAC 24 VAC Digital Input 2 See below24 VAC 24 VAC Digital Input 1 See belowDigital Input (1-4)- connect to GND to activate or leave floating (unconnected) to deactivateTransistor Output (1-4)- Max. load 100mA, max. voltage 24V DC. An open-collector NPN transistor withthe emitter connected to pin 2 (GND). If used with an external relay, a diode must be connected in parallelwith the load for protection against any voltage transients.1. Loosen the corresponding screw on top of the pin (see the table above to determinewhich pin to use).
AXIS 231D+/232D+ - Connection Module492. Push the cable into the connector and secure it by fastening the screw.Schematic Diagram - AXIS 231D+/232D+ I/O connectors and power3.3VSwitchMode•PS GND o~24VAC~24VACPowersupplyGND oGND oIN 1 oIN 2 oIN 3 oe.g. doorbell•IN 4oOUT 1•OUT 2 o•oOUT 3•OUT 4 oNote: Unmarked I/O connectors on the connection module can not be used.
Page 5 and 6: AXIS 231D+/232D+ - Description5AXIS
Page 7 and 8: AXIS 231D+/232D+ - Using the Networ
Page 9 and 10: AXIS 231D+/232D+ - Using the Networ
Page 11 and 12: AXIS 231D+/232D+ - Video Streams11V
Page 13 and 14: AXIS 231D+/232D+ - Video Streams13T
Page 15 and 16: AXIS 231D+/232D+ - Configuring the
Page 21: AXIS 231D+/232D+ - Live View Config
Page 24 and 25: 24 AXIS 231D+/232D+ - Live View Con
Page 26 and 27: 26 AXIS 231D+/232D+ - Live View Con
Page 28 and 29: 28 AXIS 231D+/232D+ - Dome Configur
Page 30 and 31: 30 AXIS 231D+/232D+ - Event Configu
Page 36 and 37: 36 AXIS 231D+/232D+ - System Option
Page 50 and 51: 50 AXIS 231D+/232D+ - Troubleshooti
Page 52 and 53: 52 AXIS 231D+/232D+ - Troubleshooti
Page 54 and 55: 54 AXIS 231D+/232D+ - Technical Spe
Page 60 and 61: 60 AXIS 231D+/232D+ - Glossary of T
Page 68: 68 AXIS 231D+/232D+Pan/Tilt/Zoom Co

AXIS 231D+/232D+ Network Dome Camera User's Manual

Create successful ePaper yourself

Delete template?

Save as template?