Amplifier and Data Converter Selection Guide (Rev. B

110➔Design and Evaluation ToolsData Converter Plug-In (DCP) for Code Composer Studio IDEDevice Description C28x C54x C55x C6000 C64xDigital-to-Analog Converters (Continued):TLV320DAC23 24-bit, stereo, 96kHz, audio DACTLV560410-bit, 4-channel, 3µs, 2.7-5.5VTLV5606 10-bit, 1-channel, 3µs, 2.7-5.5V ✔ ✔ 2TLV560810-bit, 8-channel, 1µs, 2.7-5.5VTLV561012-bit, 8-channel, 1µs, 2.7-5.5VTLV561412-bit, 4-channel, 3µs, 2.7-5.5VTLV5616 12-bit, 1-channel, 3µs, 2.7-5.5V ✔ ✔ 2TLV5617A 10-bit, 2-channel, 2.5µs, 2.7-5.5V ✔ ✔ 2TLV5618A 12-bit, 2-channel, 2.5µs, 2.7-5.5V ✔ ✔ 2TLV5623 8-bit, 1-channel, 3µs, 2.7-5.5V ✔ ✔ 2TLV5624 8-bit, 1-channel, 1µs, 2.7-5.5V, internal reference ✔ ✔ 2TLV5625 8-bit, 2-channel, 2.5µs, 2.7-5.5V ✔ ✔ 2TLV5626 8-bit, 2-channel, 1µs, 2.7-5.5 V, internal reference ✔ ✔ 2TLV56298-bit, 8-channel, 1µs, 2.7-5.5VTLV563012-bit, 8-channel, 1µs, 2.7-5.5V, internal referenceTLV563110-bit, 8-channel, 1µs, 2.7-5.5V, internal referenceTLV56328-bit, 8-channel, 1µs, 2.7-5.5VTLV5636 12-bit, 1-channel, 1µs, 2.7-5.5V, internal reference ✔ ✔ 2TLV5637 10-bit, 2-channel, 1µs, 2.7-5.5V, internal reference ✔ ✔ 2TLV5638 12-bit, 2-channel, 1µs, 2.7-5.5V, internal reference ✔ ✔ 2CodecsAIC111 16-bit, 1-channel, 40kSPS, 1.3V, micro-power ✔PCM3002 20-bit, stereo, 48kHz ✔ ✔TLC320AD50 16-bit, 1-channel, 22kHz , audio codecTLV320AIC10 16-bit, 1-channel, 22kSPS, voiceband codec ✔TLV320AIC12/12k 16-bit, 1-channel, 26/104kSPS, voiceband codec ✔ ✔ ✔ ✔TLV320AIC13 16-bit, 1-channel, 26/104kSPS, voiceband codec, 1.1V I/O ✔ ✔ ✔ ✔TLV320AIC14/14k 16-bit, 1-channel, 26/104kSPS, voiceband codec ✔ ✔ ✔ ✔TLV320AIC15 16-bit, 1-channel, 26/104kSPS, voiceband codec, 1.1V I/O ✔ ✔ ✔ ✔TLV320AIC20/20k 16-bit, 2-channel, 26/104kSPS, voiceband codec, 3.3V I/O ✔ ✔ ✔ ✔TLV320AIC21 16-bit, 1-channel, 26/104kSPS, voiceband codec, 1.1V I/O ✔ ✔ ✔ ✔TLV320AIC22C 16-bit, 2-channel, 16kHz, dual VOIP codec ✔ ✔ ✔TLV320AIC23B 24-bit, stereo, 96kHz, stereo audio codec ✔ 1 ✔ 1 ✔ 1 ✔ 1TLV320AIC24/24k 16-bit, 1-channel, 26/104kSPS, voiceband codec, 3.3V I/O ✔ ✔ ✔ ✔TLV320AIC25 16-bit, 1-channel, 26/104kSPS, voiceband codec, 1.1V I/O ✔ ✔ ✔ ✔Application SpecificAFE1230 16-bit, 1-channel, 2.5Mbps, G.SHDSL analog front end ✔AFEDRI8201 12-bit, 1-channel, 80MHz, ADC front end for AM/FM and HD radios ✔AMC7820 12-bit, 8-channel, 100kSPS, analog monitoring and control circuitry ✔ ✔AMC7823 12-bit, 8-channel, 200kSPS, analog monitoring and control circuitry ✔1 With (E)DMA support 2 These DACs share the same driver, so an additional alignment might be necessary.RemarksC28x:C54x:A check-mark in this column indicates that the data converter support tool generates a full driver for the TMS320C2800 family, which not only configures the data converter, but alsothe peripheral the device is connected to (e.g. the serial port or the memory interface). If no check-mark is present, only the register settings, but no interface functions are generated.A check-mark in this column indicates that the data converter support tool generates a full driver for the TMS320C5400 family, which not only configures the data converter, but also theperipheral the device is connected to (e.g. the serial port or the memory interface). If no check-mark is present, only the register settings, but no interface functions are generated.C55x: A check-mark in this column indicates that the data converter support tool generates a full driver for the TMS320C5500 family, which not only configures the data converter, but also theperipheral the device is connected to (e.g. the serial port or the memory interface). If no check-mark is present, only the register settings, but no interface functions are generated.C6000: A check-mark in this column indicates that the data converter support tool generates a full driver for the TMS320C6200/C6700 family, which not only configures the data converter, but alsothe peripheral the device is connected to (e.g. the serial port or the memory interface). If no check-mark is present, only the register settings, but no interface functions are generated.C64x:A check-mark in this column indicates that the data converter support tool generates a full driver for the TMS320C6400 family, which not only configures the data converter, but also theperipheral the device is connected to (e.g. the serial port or the memory interface). If no check-mark is present, only the register settings, but no interface functions are generated.The online version of this table can be found at: www.ti.com/dcplug-inAmplifier and Data Converter Selection Guide Texas Instruments 3Q 2007