10.07.2015 Views

Amplifier and Data Converter Selection Guide (Rev. B

Amplifier and Data Converter Selection Guide (Rev. B

Amplifier and Data Converter Selection Guide (Rev. B

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>Amplifier</strong>s15TI develops high-speed signal conditioningproducts using state-of-the-art processes thatgive leading-edge performance. Used inhigh-speed signal chains <strong>and</strong> analog-to-digitaldrive circuits, high-speed amps are broadlydefined as any amplifier having at least50MHz of b<strong>and</strong>width <strong>and</strong> at least 100V/µsslew rate. High-speed amps from TI come inseveral different types <strong>and</strong> supplyvoltage options.Design ConsiderationsVoltage-feedback type—the mostcommonly used amp <strong>and</strong> the basic buildingblock of most analog signal chains such asgain blocks, filtering, level shifting, buffering,etc. Most voltage-feedback amps are unitygainstable, though some are decompensatedto provide wider b<strong>and</strong>width, faster slew rate<strong>and</strong> lower noise.Current-feedback type—most commonlyseen in video or DSL line driver applications, ordesigns where extremely fast slew rateis needed.Fully differential amplifier (FDA)—the fullydifferential input <strong>and</strong> output topology has theprimary benefit of reducing even orderharmonics, thereby reducing total harmonicdistortion. The FDA also rejects common-modecomponents in the signal <strong>and</strong> provides a largeroutput swing to the load relative to singleendedamplifiers. Fully differential amplifiersare well-suited to driving analog-to-digitalconverters. A V COM pin sets the outputcommon-mode voltage required by newer,single-supply, ADCs.FET-Input (or CMOS) amplifiers—have higherinput impedance than typical bipolar amps<strong>and</strong> are more useful to interfacing to highimpedance sources, such as photodiodes intransimpedance circuits.Video amplifiers—can be used in anumber of different ways, but generally arein the signal path for amplifying, buffering,filtering or driving video lines. The specificationsof most interest are differential gain<strong>and</strong> differential phase. Current-feedbackamps are typically used in video applications,because of their combination of high slewrate <strong>and</strong> excellent output drive at lowquiescent power.High-Speed <strong>Amplifier</strong>sFixed <strong>and</strong> variable gain—these amps haveeither a fixed gain, or a variable gain that canbe set either digitally with a few control pins,or linearly with a control voltage. Fixed-gainamplifiers are fixed internally with gainsetting resistors. Variable gain amplifiers canhave different gain ranges, <strong>and</strong> can also bedifferential input <strong>and</strong>/or output.Packaging—high-speed amplifiers typicallycome in surface-mount packages, becauseparasitics of DIP packages can limit performance.Industry st<strong>and</strong>ard surface-mountpackages (SOIC, MSOP, TSSOP <strong>and</strong> QFN) h<strong>and</strong>lethe highest speed requirements. For b<strong>and</strong>widthsapproaching 1GHz <strong>and</strong> higher, theQFN package decreases inductance <strong>and</strong>capacitance.Evaluation boards—high-speed amps have anassociated fully populated evaluation module(EVM) or an unpopulated printed circuit board(PCB). EVMs are a very important part ofhigh-speed amplifier evaluation, since layout iscritical to design success. To make layoutsimple, Gerber files for the EVMs are available.See page 101 for more information.➔Voltage FeedbackCurrent FeedbackHigh-Speed < 500MHz (GBW Product)THS4001THS4011/4012THS4051/4052THS4081/4082THS4041/4042OPA820/OPA4820OPA2613OPA2614OPA842OPA2652OPA2822THS4271OPA690/2690/3690OPA890/OPA2890OPA2889Fully DifferentialTHS4120/4121THS4130/4131THS4140/4141THS4500/4501THS4502/4503THS4509THS4508THS4511THS4513THS4520FET or CMOS InputOPA656OPA657 (G > 7)OPA355/2355/3355OPA356/2356OPA354/2354/4354OPA357/2357OPA358/OPA360/OPA361OPA300/OPA2300OPA301/OPA2301THS4631OPA380/OPA2380Low Voltage ≤ 3.3VTHS4120/21OPA355/2355/3355OPA356/2356OPA354/2354/4354OPA357/2357OPA300/OPA2300OPA301/OPA2301OPA830/OPA2830/OPA4830OPA832/OPA2832/OPA3832Low Noise ≤ 3nV/ HzTHS4031/4032OPA2822THS4130/4131THS4271OPA300/OPA301OPA820/OPA4820OPA842OPA843 (G > 3)OPA846/OPA2846 (G > 7)OPA847 (G > 12)OPA358OPA820/OPA4820Variable <strong>and</strong> Fixed GainTHS7530VCA2612/2613/2614/2616/2618VCA810VCA8613/VCA8617VCA2615/VCA2617OPA860OPA861BUF602BUF634OPA615OPA693/OPA3693General Purpose+5V to ±5V OperationalOPA683/2683OPA684/2684/3684/4684OPA691/2691/3691OPA692/3692 (G = 2 or ±1)OPA2677THS3201/02OPA694/OPA2694OPA2674General Purpose±5V to ±15V OperationalTHS3112/15THS3122/25THS3110/11THS3120/1THS3091/95THS3092/96THS6184Very High-Speed > 500MHz (GBW Products) Rail-to-Rail Input or OutputOPA843OPA847OPA846/OPA2846THS4271THS4302High-speed amplifiers selection tree.OPA355/2355/3355OPA356/2356THS4222/4226OPA354/2354/4354OPA357/2357OPA358/OPA360/OPA361OPA830/OPA2830/OPA4830OPA832/OPA2832/OPA3832Voltage Limiting OutputOPA698OPA699 (G ≥ 4)Very High-Speed > 500MHzOPA695THS3201/THS3202OPA694/OPA2694Preview devices appear in BLUE.New devices appear in RED.Texas Instruments 3Q 2007<strong>Amplifier</strong> <strong>and</strong> <strong>Data</strong> <strong>Converter</strong> <strong>Selection</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!