78➔Analog Monitoring <strong>and</strong> ControlAnalog Monitoring <strong>and</strong> Control/Fan Controllers16-Bit, 250kSPS, 6-Channel ADCADS8365Get datasheets at: www.ti.com/sc/device/ADS8365Key Features• Six input channels• Fully differential inputs• Six independent 16-bit ADCs• 4µs throughput per channel• Tested no missing codes to 15-bits• Low power:• Normal mode: 200mW• Nap mode: 50mW• Power-down mode: 50µW• Pin compatible to ADS8364• Packaging: TQFP-64Applications• Motor control• Multi-axis positioning systems• 3-phase power controlThe ADS8365 includes six, 16-bit, 250kSPS ADCs with six fully differential input channelsgrouped into two pairs for high-speed simultaneous signal acquisition. The ADS8365architecture provides excellent common-mode rejection of 80dB at 50kHz—ideal for high-noiseenvironments. It also includes a high-speed parallel interface with a direct address mode, acycle <strong>and</strong> a FIFO mode.Ch A0+Ch A0–Hold ACh A1+Ch A1–Ch B0+Ch B0–Hold BCh B1+Ch B1–Ch C0+Ch C0–Hold CS/HAmp 1S/HAmp 2S/HAmp 3S/HAmp 4S/HAmp 5ADC 1Ref BufferRef BufferADC 2ADC 3ADC 4ADC 5Ref BufferADS8365InterfaceConversion<strong>and</strong>ControlFIFORegister6xA0A1A2ADDNAPRDWRCSFDEOCCLKRESETBYTEDATAINPUT/OUTPUTCh C1+Ch C1–S/HAmp 6ADC 6REFINREFOUTInternal2.5VReferenceIntelligent Fan Controller with I 2 C InterfaceAMC6821ADS8365 functional block diagram.Get samples, datasheets, evaluation modules <strong>and</strong> app reports at: www.ti.com/sc/device/AMC6821Key Features• Remote/local temperature sensor range:• +50°C to +100°C, ±1°C• –25°C to +125°C, ±3°C• Resolution: 0.125°C• PWM controller• Frequency: 10 to 40kHz• Duty cycle: 0 to 100%, 8-bits• Automatic fan speed control loops• SMB interface• Power: 2.7V to 5.5V• Packaging: QFN-16 (4x4mm), SSOP-16Applications• Notebook PCs• Network servers• Desktop PCs• Telecommunication equipment• PC-based equipmentThe AMC6821 is an analog interface circuit with an integrated temperature sensor to measurethe ambient temperature <strong>and</strong> one remote diode sensor input to measure external (CPU)temperature—ideal for notebook <strong>and</strong> desktop PC applications. It also includes a PWMcontroller, automatic fan speed control loops <strong>and</strong> SMB interface. See page 84 for specifications.VDDAMC6821AMC6821 functional block diagram.*AMC6821 expected release date 3Q 2007.<strong>Amplifier</strong> <strong>and</strong> <strong>Data</strong> <strong>Converter</strong> <strong>Selection</strong> <strong>Guide</strong> Texas Instruments 3Q 2007
Dual, 1MSPS, 12-Bit, 2 + 2 Channel ADCADS7863Get samples, datasheets, evaluation modules <strong>and</strong> app reports at: www.ti.com/sc/device/ADS7863Analog Monitoring <strong>and</strong> ControlAnalog Monitoring <strong>and</strong> Control/Fan Controllers79➔Key Features• 4 input channels• Fully differential inputs• 500ns total throughput per channel• No missing codes• 2MHz effective sampling rate• Low power: 40mW• SSI serial interfaceThe ADS7863 is a dual, 12-bit, 1MSPS, ADC with four fully differential input channels groupedinto two pairs for high-speed, simultaneous signal acquisition. Inputs to the sample-<strong>and</strong>-holdamplifiers are fully differential <strong>and</strong> are maintained differential to the input of the A/D converter.This provides excellent common-mode rejection of 80dB at 50kHz which is important in highnoise environments. The ADS7863 offers a high-speed, dual serial interface <strong>and</strong> control inputsto minimize software overhead.Applications• Motor control• Multi-axis positioning systems• 3-phase power controlCH A0+CH A0–CH A1+CH A1–REFINREFOUTCH B0+CH B0–SHASHAInternal2.5VReferenceCDACSARCOMPADS7863COMPSerialInterfaceSERIAL DATA ASERIAL DATA BM0M1A0CLOCKCSRDBUSYCONVSTCDACSee page 29 fora completeselection of analogcurrent shunt monitors.CH B1+CH B1–ADS7863 functional block diagram. *Expected release date 4Q 2007.SARAnalog Monitoring <strong>and</strong> Control <strong>Selection</strong> <strong>Guide</strong>Sample Number ofRes. Rate Input Input Voltage Linearity NMC SINAD PowerDevice (Bits) (kSPS) Channels Interface (V) V REF (%) (Bits) (dB) (mW) Package Price *ADS1201 24 4 1 SE/1 Diff Serial 5 Int/Ext 0.0015 24 — 25 SOIC-16 $6.15AMC1210 16 90MHz Clock 4 Digital Filters Serial/P4 Digital Bit Stream — — — — 1.5/MHz/Ch QFN-40 $1.55ADS8361 16 500 2 x 2 Diff Serial, SPI ±2.5 at 2.5 Int/Ext 0.0012 14 83 150 SSOP-24 $8.75ADS8364 16 250 1 x 6 Diff P16 ±2.5 at 2.5 Int/Ext 0.009 14 82.5 413 TQFP-64 $18.10ADS8365 16 250 1 x 6 Diff P16 ±2.5 at 2.5 Int/Ext 0.006 15 87 190 TQFP-64 $16.25ADS1202 16 40 1 SE/1 Diff Serial ±0.25 Int/Ext 0.018 16 — 33 TSSOP-8 $2.50ADS1203 16 40 1 SE/1 Diff Serial ±0.25 Int/Ext 0.003 16 — 33 TSSOP-8 $2.70ADS1208 16 40 1 SE/1 Diff Serial ±0.125 Int/Ext 0.012 16 — 64 TSSOP-16 $2.95ADS1205 16 40 2 Diff Serial ±2.5 at 2.5 Int/Ext 0.005 16 — 75 QFN-24 $3.95ADS1204 16 40 4 SE/4 Diff Serial ±2.5 at 2.5 Int/Ext 0.003 16 — 122 QFN-32 $6.75ADS7871 14 40 8 SE/4 Diff Serial, SPI PGA (1,2,4,8,10,16,20) Int/Ext 0.03 13 — 6 SSOP-28 $5.00ADS7863 12 2000 2 x 2 Diff Serial, SPI ±2.5 at 2.5 Int/Ext 0.024 12 — 40 SSOP-14 $4.90ADS7869 12 1000 12 Diff Serial, SPI/P12 ±2.5 at +2.5 Int 0.06 11 71 175 TQFP-100 $14.60ADS7861 12 500 2 x 2 Diff Serial, SPI ±2.5 at 2.5 Int/Ext 0.024 12 70 25 SSOP-14 $4.05ADS7862 12 500 2 x 2 Diff P12 ±2.5 at 2.5 Int/Ext 0.024 12 71 25 TQFP-32 $5.70ADS7864 12 500 3 x 2 Diff P12 ±2.5 at 2.5 Int/Ext 0.024 12 71 50 TQFP-48 $6.65AMC7823 12 200 8 SE I/O DAS Serial, SPI 5 Int/Ext 0.024 12 74 100 QFN-40 $9.75AMC7820 12 100 8 DAS Serial, SPI 5 Int 0.024 12 72 (typ) 40 TQFP-48 $3.75ADS7870 12 50 8 SE Serial, SPI PGA (1,2,4,8,10,16,20) Int 0.06 12 72 4.6 SSOP-28 $4.15* Suggested resale price in U.S. dollars in quantities of 1,000. New products are listed in bold red. Preview products are listed in bold blue.Texas Instruments 3Q 2007<strong>Amplifier</strong> <strong>and</strong> <strong>Data</strong> <strong>Converter</strong> <strong>Selection</strong> <strong>Guide</strong>