2011 1 Series Owner's Manual without iDrive - Irvine BMW

Replacing componentsXenon headlampsParking lamps, roadside parkinglamps, daytime running lightsH8 bulb, 35 wattsThe figure shows the right-hand headlamp.1. Remove the headlamp cover.2. Turn the bulb, see arrow, and remove it.3. Pull off the connector and replace the bulb.4. Attach the connector, insert the bulb andturn it all the way in the opposite direction.5. Attach the headlamp cover.3. Slide the bulb out of the holder and pull offthe connector.4. Replace the bulb and attach the connector.5. Insert the bulb holder and turn it all the wayin the opposite direction.6. Attach the headlamp cover.Turn signals, frontPY21W bulb, 21 wattsThe turn signal bulb can be changed via a coverin the wheel arch.Corner-illuminating lampsH3 bulb, 55 wattsThe figure shows the right-hand headlamp.1. Remove the top headlamp cover, using thescrewdriver to push the detents to one side.2. Turn the bulb holder, see arrow, andremove it.1. Turn the respective wheel inwards.2. Using a coin, turn both locks of the cover allthe way to the left, arrows 1, and remove thecover.3. Turn the bulb holder to the left and removeit, arrow 2.4. Apply gentle pressure to the bulb whileturning it to the right for removal andreplacement.5. Insert the bulb holder and lock it by turningit to the right.6. Attach the cover by positioning the bottomedge first and then turning both locks all theway to the right.134