2011 1 Series Owner's Manual without iDrive - Irvine BMW

Do not initialize the system while snow chainsare attached.For operating principle refer to page 65.1. Start the engine immediately before pullingaway, but do not drive off yet.2. Briefly press the button 1 in the turn signal/high beam lever repeatedly until the correspondingsymbol and "RESET" appear.3. Press button 2 to confirm your choice of theFlat Tire Monitor.4. Press button 2 for approx. 5 seconds, untilthe reading shown below is displayed:5. Start driving.The initialization is completed during driving,which can be interrupted at any time.When driving resumes, the initialization is continuedautomatically. With a full load:4 persons, cargo area full:approx. 30 miles/50 kmDrive cautiously and do not exceed aspeed of 50 mph/80 km/h.When there is a tire pressure loss, the handlingcharacteristics change, e.g. there will bereduced directional stability during braking,braking distances will be longer, and self-steeringresponse will change.