2011 1 Series Owner's Manual without iDrive - Irvine BMW

Controls overviewFormats and units of measureYou can set formats and units of measure.For operating principle refer to page 65.1. Switch on the ignition, refer to page 48.2. Briefly press button 1 in the turn signal/highbeam lever up or down repeatedly until thesymbol appears in the display, accompaniedby the word "SET".Resetting to factory settingsYou can reset the formats and units of measureto the default settings.1. Briefly press button 1 in the turn signal/highbeam lever up or down repeatedly until thesymbol appears in the display, accompaniedby the word "SET".3. Press button 2.4. Use button 1 to select desired format ordesired unit of measure, e.g. for fuel consumption.2. Press button 2.3. Use button 1 to select "RESET".> Fuel consumption: mpg, km/l,l/100km> Distance covered: mls, km> Time: 12h, 24h format> Date: day.month dd.mm,month/day mm/dd> Temperature: 7, 65. Press button 2.6. Use button 1 to make the setting.7. Press button 2.The setting is stored for the remote controlcurrently in use.664. Press button 2 until is displayed.The settings are reset.The setting is stored for the remote controlcurrently in use.Service requirementsThe remaining driving distance and the date ofthe next scheduled service are displayed briefly