2011 1 Series Owner's Manual without iDrive - Irvine BMW

The corresponding memory button 1 is nowprogrammed with the signal of the originalhand-held transmitter.You can operate the device while the ignition isswitched on.If the device fails to function even afterrepeated programming, check whetherthe original hand-held transmitter uses an alternating-codesystem. To do so, either read theinstructions for the original hand-held transmitteror hold down the programmed memorybutton 1 of the integrated universal remotecontrol. If the LED 2 on the integrated universalremote control flashes rapidly and then remainslit for about two seconds, the original hand-heldtransmitter uses an alternating-code system. Ifit uses an alternating-code system, programthe memory buttons 1 as described underAlternating-code hand-held transmitters.