Software application manual - VTP UP

Creating and Modifying Acquisition Methods4.6 Modifying a Coulochem III Method While Acquiring DataDuring active data acquisition the parameters of the actively running Coulochem III methodare loaded and displayed in the Analyst driver window and tabs. All fields are disabled inorder to prevent modification during a run. However, it is still possible to modify anyacquisition method during acquisition; a separate menu item and dialog are available for thispurpose.To modify an existing attached method, select File > Edit Method from Analyst File fromthe driver menu, select the file from the list and click Open. The method editing dialogshown in Figure 4.11 will appear.Figure 4.11. Method Editing Dialog.This dialog has all of the same tabs as the main driver window, and editing is done in exactlythe same way as described in the sections above. To view or modify the configurationparameters, select Coulochem III Configuration from the dialog’s Instrument menu. Toview or modify the Thermal Organizer parameters, select Thermal Organizer from thedialog’s Instrument menu. In either case, a new sub-dialog will appear with all of the sameparameters as are found on the main driver interface. Remember to click the OK button whenclosing the sub-dialog if you wish to save any changes made.Coulochem ® III Analyst Driver – Version 1.0 37User’s Manual