Software application manual - VTP UP

Appendix AC:\Program Files\ESA Biosciences folder. It will also ensure that the ESA USB driveris properly installed.6. When finished, click the Finish button.7. Remove the installation CD and store it in a safe place.A.3 Updating the Firmware with the Update Utility1. Ensure that the USB cable is properly connected, as described in the previous section.2. Turn on the Coulochem III and allow it to complete its power-up tests.3. Start the update utility by selecting Start > All Programs > Corona-CoulochemFirmware Update Utility > Corona-Coulochem Firmware Update Utility from theWindows Start menu. When operating on the Coulochem III, the update utility willappear as in Figure A-1 below.Figure A-1. Firmware Update Utility for Coulochem III58 Coulochem ® III Analyst Driver – Version 1.0User’s Manual