JW220-UM-251 - Graphtec

2. PART NAMES and FUNCTIONSRear View(17) Roll paper stocker ......Used for loading roll paper for printing.(18) Access door ................Open this door to remove the paper if it becomes jammed.(19) Power inlet ..................Used to connect the power cable.(20) USB interface connector ..Used to connect the USB cable.A2-size Paper Feed CassetteThe A2-size paper feed cassette is designed specifically for feeding plain paper.Cut sheets of standard-size paper, from A4-size to A2-size *1 , can be loaded in the A2-size cassette to enableautomatic feeding of paper to the printer.*1: Please note that only paper of the same size can be loaded at one time in the cassette.The number of cut sheets that can be loaded *2• Plain paper (64 g/m 2 ): approx. 100 sheets*2: The number of sheets is a guideline only. When actually loading the paper in the cassette, make sure thatthe top of the stack is below the line under the [MAX] mark printed on the stock tray.Paper alignment levers ........Move these levers to match the paper size and hold the paper in place.Stock tray ............................Used to load cut sheets for feeding.Paper guide table ................Use this table when manually feeding sheets for printing.JW220-UM-251-93702-2