JW220-UM-251 - Graphtec

7. DISASSEMBLY AND REASSEMBLY7.2.14 How to Replace an Ink Supply TubeHave ready a syringe attached to a needle, double-sided adhesive tape (5 x 240 mm) and a new tube(Required length: about 910 mm for each tube).How to detach the ink supply tube(1) Detach the left side cover (see Subsection 7.1.1).(2) Detach the left rear cover (see Subsection 7.1.5).(3) Detach the center rear cover (see Subsection 7.1.2).(4) Detach the right top cover (see Subsection 7.1.3).(5) Detach the right rear cover (see Subsection 7.1.5).(6) Release all the clamps holding the ink supply tubes.Clamp(7) Release the print head cover from the front, and then open the print head cover.Print head coverRelease the print head coverfrom here.JW220-UM-251-93707-34