JW220-UM-251 - Graphtec

7. DISASSEMBLY AND REASSEMBLY7.2.8 How to Replace the Ejection Roller B AssemblyHow to detach the ejection roller B assembly(1) Detach the left chassis (see Subsection 7.2.1).(2) Detach the right chassis (see Subsection 7.2.5).(3) Detach the ejection plate (see Subsection 7.2.7).(4) Use tweezers to push the ejection roller shaft holder positioning pin, and then release theejection roller shaft holder from the right side plate.Ejection roller B assemblyEjection roller B shaft holderEjection roller B assemblyEjection roller B shaft holder positioning pinTurn the ejection roller B shaft holder to release it.Push this pin to release the ejection roller B shaft holder.JW220-UM-251-93707-20