11.07.2015 Views

JW220-UM-251 - Graphtec

JW220-UM-251 - Graphtec

JW220-UM-251 - Graphtec

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

7.2.2 How to Replace the Main Board CoverHow to detach the main board cover7. DISASSEMBLY AND REASSEMBLY(1) Turn off the power, and then disconnect the power cable from the <strong>JW220</strong>.(2) Detach the left side cover (see Subsection 7.1.1).(3) Detach the left rear cover (see Subsection 7.1.5).(4) Detach the center rear cover (see Subsection 7.1.2).(5) Detach the control panel cover (see Subsection 7.1.7).(6) Gently peel off the control panel flexible cable from the main board cover.(7) Remove the three M3L6 binding head screws holding the main board cover.M3L6 binding head screw(8) Disconnect the control panel flexible cable from connector J4 on the main board.(9) Disconnect the cover sensor connector mounted on the main board cover.How to reinstall the main board cover(1) Reattach the main board cover in the reverse order in which it was detached.<strong>JW220</strong>-<strong>UM</strong>-<strong>251</strong>-93707-11

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!