920i Installation Manual V4.01 - Rice Lake Weighing Systems

More documents

Recommendations

Info

SoftkeyContrastTestStopGoOffScreenF1–F10More…DescriptionAdjusts the screen contrast.Future functionality.Sends AuxFmt1 out its configured port toprompt a red light on a LaserLight.Sends AuxFmt2 out its configured port toprompt a green light on a LaserLight.Sends AuxFmt3 out its configured port toturn a LaserLight red/green light off.Allows multiple display screens without auser program.User-programmable keys; defined byapplication.For applications with more than five definedsoftkeys, the More… key is automaticallyassigned to the fifth softkey position. PressMore… to toggle between softkey groups.1.4 Contrast AdjustmentThere are two methods for adjusting contrast: a potwhich can be manually turned (see Figure 2-3 onpage 10), and a digital contrast (CONTRASTparameter, see Figure 3-11 on page 42). Front paneladjustment can be made by assigning the softkey. Thisis available for Rev H CPU board or higher.The potentiometer should be adjusted to the centerposition and the digital contrast used for fine-tuning.Table 1-1. Configurable Softkeys (Continued)1.5 System Configurations and OptionsTable 1-2 lists the 920i system models and part numbers. All models include CPU board with two option cardslots, PS/2 and DB-9 comm ports. Each model has a single- or dual-channel A/D card installed in Slot 1.Feature Universal Deep Universal Panel Mount Wall MountCPU board with two option card slots X X X XSingle- or dual-channel A/D card in slot 1 X X X XDIN-8 and DB-9 communications ports X X X X25W internal power supplyX65W internal power supply X X XSupports internal 2-card expansion board X X XSupports internal 6-card expansion boardXSupports internal relay rackXTable 1-2. 920i Model FeaturesModel PNsSystem ModelSingle-Channel A/DDual-Channel A/DUniversal (tilt stand) model, 115 VAC 67527 69767Universal (tilt stand) model, 230 VAC, North American, NEMA 15-5 power cord 67615 69772Universal (tilt stand) model, 230 VAC, European, CEE 7/7 power cord 69522 69774Deep enclosure model, 115 VAC 82455 82456Deep enclosure model, 230 VAC, North American, NEMA 15-5 power cord 82457 82458Deep enclosure model, 230 VAC, European, CEE 7/7 power cord 82459 82460Panel mount model, 115 VAC 69764 69771Panel mount model, 230 VAC, North American, NEMA 15-5 power cord 69766 69777Panel mount model, 230 VAC, European, CEE 7/7 power cord 72137 72138Wall mount model, 115 VAC 69763 69770Table 1-3. Part Numbers for 920i Models4 920i Installation Manual
Model PNsSystem ModelSingle-Channel A/DDual-Channel A/DWall mount model, 230 VAC, North American, NEMA 15-5 power cord 69765 69776Wall mount model, 230 VAC, European, CEE 7/7 power cord 72133 72134Model designations shown on indicator serial tags include a suffix (xy) that describes the enclosure type (x) and power input (y).Codes used for this suffix are as follows:x: 1 = Desktop; 2 = Universal; 3 = Wall mount; 4 = Panel mount; 5 = Deep enclosurey: A = 115 VAC; B = 230 VAC; C = 9–36 VDC; D = 10–60 VDCTable 1-3. Part Numbers for 920i ModelsOption CardsTable 1-4 lists the available 920i option cards. Any ofthe listed option cards can be installed in Slot 2 of theCPU board or in any available slot of an attachedexpansion board.Option CardTable 1-4. Part Numbers for 920i Option CardsPNSingle-channel A/D card 68532Dual-channel A/D card 68533Single-channel analog output card 67602Dual-channel analog output card 103138Dual serial port expansion card 6760424-channel digital I/O expansion card 676011MB NV RAM memory expansion card 67600Pulse input card 67603Ethernet communications card 71986EtherNet/IP interface card 87803DeviceNet interface card 68541Allen-Bradley Remote I/O interface card 68539Profibus DP interface card 68540ControlNet interface card 103136Analog input card with thermocouple input 87697Expansion BoardsTable 1-5 lists the expansion boards available for thepanel mount and wall mount enclosures. The panelmount enclosure can accommodate a single 2-cardexpansion board; the wall mount enclosure supportseither a 2-card or a 6-card expansion board. Any ofthe available option cards can be installed in anyavailable expansion board slot.A second two- or six-card expansion board can also beconnected to the 920i, providing up to 14 option cardslots. Consult factory for details. See Section 2.5 onpage 14 for detailed information about slot and serialport assignments for expanded system configurations.Expansion BoardTwo-card expansion board for panel mountenclosure, slots 3–4. Includes 2-inch, 34-pinribbon cable and power supply cable.Two-card expansion board for wall mountenclosure, slots 3–4. Includes 24-inch, 34-pinribbon cable and power supply cable.Six-card expansion board for wall mountenclosure, slots 3–8. Includes 16-inch, 34-pinribbon cable and power supply cable.PN717436978269783Table 1-5. Part Numbers for 920i Expansion BoardsRelay Options8-, 16-, and 24-channel relay racks are available for all920i systems. Relays can be installed internally in thewall mount enclosure; all other models require anexternal enclosure for the relays. Consult factory fordetails.DC Power SuppliesTwo DC power supplies are available for mobile 920iapplications:PN 97474, 9–36 VDC supplyPN 99480, 10–60 VDC supplyConsult factory for more information.Outdoor DisplayAn optional display, PN 100759, is available forapplications requiring use of the 920i in bright, sunlitenvironments. Consult factory for details.1.6 Summary of ChangesChanges to recent editions of this manual are listedbelow:Version 4.01• HWSUPPORT returns (see Section 9.1.2 onpage 90).• The new CPU board (PN 109549) wasdesigned to take advantage of newertechnology and eliminate any parts that are atIntroduction 5
Page 1: ®Programmable HMI Indicator/Contro
Page 4 and 5: 4.2 Front Panel Calibration. . . .
Page 6 and 7: iv920i Installation Manual
Page 8 and 9: • Single- and dual-channel A/D ca
Page 12 and 13: end-of-life stage.• There is no S
Page 14 and 15: 2.0 InstallationThis section descri
Page 16 and 17: 2.3.3 Serial CommunicationsThe four
Page 18 and 19: Figure 2-6. 920i Rev H CPU Board2.3
Page 20 and 21: 1SLOT12.5 Expansion Board Configura
Page 22 and 23: 2.8 Fuse ReplacementFuses for the u
Page 24 and 25: 2.11 Replacement Parts and Assembly
Page 26 and 27: 282918/12X/E17/4X/BCFGA14/11X/A4111
Page 28 and 29: 3.0 ConfigurationTo configure the 9
Page 30 and 31: 3.1.5 Total Scale ConfigurationThe
Page 32 and 33: 3.2.1 SCALES MenuThe SCALES menu is
Page 34 and 35: SCALES MenuParameter Choices Descri
Page 36 and 37: …GRADS SPLITFORMAT ZTRKBND ZRANGE
Page 38 and 39: SCALES Menu, FORMAT Submenu, SPLIT
Page 40 and 41: …GRADS SPLITFORMAT ZTRKBND ZRANGE
Page 42 and 43: SCALES Menu, FORMAT Submenu, SPLIT
Page 44 and 45: SCALES SERIAL FEATURE PFORMT SETPTS
Page 46 and 47: SERIAL MenuParameter Choices Descri
Page 48 and 49: 3.2.3 FEATURE MenuSCALES SERIAL FEA
Page 50 and 51: FEATURE MenuParameter Choices Descr
Page 52 and 53: FEATURE Menu, CONTACT SubmenuThe CO
Page 54 and 55: FEATURE Menu, REGULAT / INDUST Subm
Page 56 and 57: 3.2.6 DIG I/O MenuThe DIG I/O menu
Page 58 and 59: 3.2.7 ALGOUT MenuThe ALGOUT menu is
Page 60 and 61:
3.2.9 VERS MenuThe VERS menu can be
Page 62 and 63:
Millivolts (or Counts)Toggles betwe
Page 64 and 65:
4. Remove all weights from the scal
Page 66 and 67:
5.4 Configuring ScalesOnce the hard
Page 68 and 69:
6.0 Print FormattingThe 920i provid
Page 70 and 71:
Command Description Supported Ticke
Page 72 and 73:
6.4.2 Using the Front PanelIf you h
Page 74 and 75:
7.0 Truck ModesThe truck in/out mod
Page 76 and 77:
8.0 SetpointsThe 920i indicator pro
Page 78 and 79:
Kind Description Batch ContinuousCO
Page 80 and 81:
AGROSS NET -GROSS -NET ACCUMROCSame
Page 82 and 83:
CPAUSE and COUNTER setpointsVALUEAC
Page 84 and 85:
EDIGIN, AVG, and TOD setpointsDIN S
Page 86 and 87:
GPLSCNTVALUESOURCECOASTBATCHPSHPRNT
Page 88 and 89:
SETPTS MenuParameter Choices Descri
Page 90 and 91:
SETPTS MenuTOLBAND 00-9999999TOLCNT
Page 92 and 93:
8.3 Batch OperationsSoftkeys can be
Page 94 and 95:
Setpoint 3 uses DIGOUT 1 to fill a
Page 96 and 97:
9.1.2 Reporting CommandsReporting c
Page 98 and 99:
Command Description ValuesSC.ROC.RE
Page 100 and 101:
Command Description ValuesSK#1-SK#3
Page 102 and 103:
Command Description ValuesSP.DACCEP
Page 104 and 105:
9.1.5 Normal Mode CommandsThe norma
Page 106 and 107:
Example. The following commands pla
Page 108 and 109:
creates a visible, 1.5" x 1.5" (120
Page 110 and 111:
SymbolStyle (x)DescriptionWidget St
Page 112 and 113:
10.0 Appendix10.1 TroubleshootingTa
Page 114 and 115:
5. Start iRev 4 and enter monitor m
Page 116 and 117:
REGULAT / INDUST ParameterREGULAT M
Page 118 and 119:
10.6 Custom Stream FormattingEach p
Page 120 and 121:
Format Identifier Defined By Descri
Page 122 and 123:
10.7.2 Cardinal 738 IndicatorSample
Page 124 and 125:
10.8 Data FormatsContinuous Output
Page 126 and 127:
10.10 Conversion Factors for Second
Page 128 and 129:
10.12 Dimension Drawings12.50"10.56
Page 130 and 131:
10.38"BACK VIEW11.56"5.20"9.16"7.95
Page 132 and 133:
10.13 Printed InformationSystem Man
Page 134:
920i Limited WarrantyRice Lake Weig
show all

920i Installation Manual V4.01 - Rice Lake Weighing Systems

Create successful ePaper yourself

Delete template?

Save as template?