Safety Organization/North Central Railway - eLocoS

7.0 GANG INSPECTION(i)(ii)(iii)(iv)(v)Whether tools and plants are sufficient and in good condition.Check strength of the gang vis-a-vis muster sheet and utilizationof men.Knowledge of gang about the Safety rules.Checking of quality of previous days work of the gang and itsquantityGrievance/difficulty of the gang staff, if any8.0 CURVE(i)(ii)(iii)Cant and Versine within limit or notSide wears on outer rail of curveCurve indicator/boards as per para no. 409 of IRPWM. Painting ofVersine station no. and Cant.9.0 POINTS & CROSSINGS(i) Physical condition and wear of Tongue rail, Stock rail andcrossing(ii) Check rail clearances of wing rail & check rail(iii) Throw of switch (95 to 115 mm)(iv) Condition of fittings(v) Standard fittings provided or not(vi) GRSP worn-out/worked out, if any(vii) Alignment and Unevenness(viii) Whether the length of turnout is standard and location of stockjoint is correct(ix) Gauge and cross level at specified location(x) Gauge, cross level and versine in lead portion10.0 LWR TRACK(i)(ii)(iii)(iv)(v)Proper maintenance oiling and greasing of SEJAngles at SEJ sleepers provided or notZero missing fittings and their effectivenessNo worn-out/work out GRSPSEJ gapes within limit or not11.0 MANNED LEVEL CROSSING(i)(ii)(iii)(iv)(v)Condition of gates, locking arrangementsFocusing of conventional tri-colour HS lamp should be checked.Preferably tri-colour LED torches should be provided.Safety equipments & tools are in proper working orders or notKnowledge of gateman in Safety rulesDuty roster and Gate calendar are provided or not